Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Unpacking and installing
- Operation
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the main dispenser with integrated cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipe manually or using the maintenance program
- Cleaning the bean system
- Cleaning the ground coffee drawer
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programs
- Rinsing the appliance
- Rinsing the milk pipe
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic descaling
- Frequently Asked Questions
- Customer Service
- Transport
- Accessories
- Saving energy
- Electrical connection
- Appliance dimensions
- Technical data
- FCC Declaration of Conformity
Parameters
49
You can individually adjust the following
parameters for each drink:
- Amount of coffee
- Brewing temperature
- Pre-brewing
- Bean type
Changing drink parameters
The Drinksmenu is displayed.
Select Edit.
TapChange drink.
Select a drink.
Now you can adjust the portion size
(see “Portion size”) or set the drink
parameters.
TapDrink parameters.
Select Amount of coffee, Brew
temperature, Pre-brewing or Type of
beans.
Select the setting you want and
tapOK.
The overview of the drink parameters
will appear in the display.
TapOK again to save your changed
settings.
Amount of coffee
The coffee machine can grind and brew
7.5–12.5g of coffee beans per cup. The
greater the quantity, the stronger the
coffee.
There are various ways to tell whether
the amount of coffee is set correctly:
The amount of coffee is too low if:
- the espresso or coffee flows into the
cup too quickly
- the crema is very pale and uneven
- the espresso or coffee lacks body
Increase the amount of coffee so that
more ground coffee is brewed.
The amount of coffee is too high if:
- the espresso or coffee flows into the
cup very slowly
- the crema is dark brown
- the espresso or coffee tastes bitter
Decrease the amount of coffee so that
less ground coffee is brewed.
Brewing temperature
The ideal brewing temperature will
depend on
- the type of coffee being used,
- whether an espresso or a coffee is
being prepared, and
- the altitude of the region.
Tip: Not all types of coffee tolerate high
temperatures. Several types are
sensitive to high temperatures, resulting
in an impaired crema and taste.
Pre-brewing ground coffee
When the pre-brewing function is
turned on, the freshly ground coffee is
first moistened with a little hot water.
Then the remaining water is forced
through the moistened coffee at high
pressure. This helps release the flavor
of the coffee.