Operating instructions/Installation instructions

Making coffee with milk
44
The milk flask
Milk is not cooled in the milk flask.
For high-quality milk froth, always
use cold milk (<50°F/10°C).
a
Connecting piece
b
Lid
c
Seal
d
Stainless steel tube
e
Glass
Using the milk flask
 Insert the connecting piece into the
lid from above until everything sits
flush.
 Connect the stainless steel tube to
the inside of the lid. Make sure that
the slanted end of the stainless steel
tube is pointing downwards.
 Fill the milk flask with milk up to a
maximum of 3/4" (2cm) below the
rim. Seal the milk flask with the lid.
 Place the milk flask next to the coffee
machine.
 Insert the milk pipe into the lid of the
milk flask and connect the flask to the
coffee machine by attaching the pipe
to the aperture in the main dispenser.
Making drinks with milk
The milk pipe must be connected to the
main dispenser and submerged in a
sufficient amount of cold milk.
The Drinksmenu is displayed.
 Place a suitable container under the
main dispenser.
 Select a drink.
Dispensing will start.
Canceling a drink
You can finish dispensing individual
drink elements early, e.g. if the cup is
not big enough.
Canceling individual drink elements
 TapStop.
Canceling the entire drink
preparation process
 TapCancel.