Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Unpacking and installing
- Operation
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the main dispenser with integrated cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipe manually or using the maintenance program
- Cleaning the bean system
- Cleaning the ground coffee drawer
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programs
- Rinsing the appliance
- Rinsing the milk pipe
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic descaling
- Frequently Asked Questions
- Customer Service
- Transport
- Accessories
- Saving energy
- Electrical connection
- Appliance dimensions
- Technical data
- FCC Declaration of Conformity
Before first use
28
Pull the cartridge holder forwards
and insert the descaling cartridge.
Push the cartridge upwards as far as
it will go.
Push the holder back into position
and replace the cover.
The next time the coffee machine is
switched off, the descaling cartridge
will fill with water. You will hear water
being pumped into the cartridge at
frequent intervals.
When a descaling cartridge is installed,
a message will appear regarding the
current start time set for automatic
descaling.
TapOK.
If you want to change the start time,
tapStart time and select the required
time.
You can also change the start time for
automatic descaling at a later time.
Setting the water hardness
Your local water authority will be able to
tell you the hardness of the water in
your area.
The machine has four programmable
hardness levels:
°dH gr/gal ppm
(mg/l CaCO
3
)
Setting*
0–8.4 0–8.7 0–150 Soft
8.4–14 8.7–
14.6
150–250 Medium
14–21 14.6–
21.9
250–375 Hard
>21 > 21.9 > 375 Very hard
* The hardness levels shown in the display may
differ from the hardness level designations in your
area. You must follow the values in the chart to
set the correct water hardness level for your area.
Select the hardness level you want
and then tapOK.
The setting is saved.
Miele@home communication enabled
household appliance will appear in the
display. You can connect your coffee
machine to your WiFi network (see
“Networking”).
Confirm the message withOK.
The coffee machine is now successfully
set up for use. You can now fill the bean
system.