Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Unpacking and installing
- Operation
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the main dispenser with integrated cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipe manually or using the maintenance program
- Cleaning the bean system
- Cleaning the ground coffee drawer
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programs
- Rinsing the appliance
- Rinsing the milk pipe
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic descaling
- Frequently Asked Questions
- Customer Service
- Transport
- Accessories
- Saving energy
- Electrical connection
- Appliance dimensions
- Technical data
- FCC Declaration of Conformity
Saving energy
106
The following tips can help you save
energy and money as well as help the
environment:
- Operate the coffee machine in “Eco
mode” (pre-set).
- Select a lower lighting setting or
refrain from using lighting when the
appliance is switched on.
- Switch off the lighting switch-off time
when the appliance is switched off.
- Switch off the time display.
- Energy consumption may increase if
you change the factory default
settings for the timer.
This setting uses more energyappears in
the display.
- Switch the coffee machine off with
the On/Off button when it is not in
use.
- Change the setting for the “Switch off
after” timer to 20minutes. Then the
coffee machine will switch off
20minutes after the last drink has
been made or a sensor button has
been tapped.
- If you only want to pre-heat your
cups occasionally, you can switch the
cup heating surface off. You can use
hot water to pre-heat the cups
instead.