Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Unpacking and installing
- Operation
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the main dispenser with integrated cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipe manually or using the maintenance program
- Cleaning the bean system
- Cleaning the ground coffee drawer
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programs
- Rinsing the appliance
- Rinsing the milk pipe
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic descaling
- Frequently Asked Questions
- Customer Service
- Transport
- Accessories
- Saving energy
- Electrical connection
- Appliance dimensions
- Technical data
- FCC Declaration of Conformity
Transport
104
Clean the drip tray and grounds
container.
Vacuuming out the ground
coffee chute using the
attachment and cleaning the
interior
To ensure coffee residues are removed
thoroughly, you should vacuum out the
ground coffee chute before transporting
and clean out the interior of the
machine carefully.
Insert the attachment supplied and
use the suction wand of your vacuum
cleaner to vacuum out the ground
coffee chute.
Remove the brew unit and clean the
interior of the machine.
Tip: You can also use your vacuum
cleaner to remove any dry coffee
grounds.
Clean the brew unit before refitting it.
Packaging
The coffee system should only be
packed when it is clean and dry.
Residues of coffee grounds can cause
scratches on surfaces. Coffee and milk
residues or water can cause a build-up
of bacteria.
Use the original packaging including
Styrofoam to pack the coffee system.
Also pack the operating instructions so
that they are available when the coffee
system is next used.