Operating Instructions Countertop Coffee Machine To prevent accidents and machine damage, you absolutely must read these instructions before installation or use. en – US, CA M.-Nr.
Intended use This coffee machine is intended for household use. Do not use the coffee machine outdoors. This coffee machine must not be used at altitudes above 6560 ft (2000 m). The machine is intended only for household use and for the preparation of drinks such as espresso, cappuccino, latte macchiato, tea, etc. All other types of use are not permitted.
Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 7 Caring for the environment .............................................................................. 17 Guide to the appliance ..................................................................................... 18 Rear of machine .................................................................................................. 19 Milk flask and milk siphon ..........................................
Contents Canceling a drink................................................................................................. 44 Tea....................................................................................................................... TeaTimer.............................................................................................................. Making tea...........................................................................................................
Contents Miele@home ........................................................................................................ Brightness ........................................................................................................... Volume................................................................................................................. Service.................................................................................................................
Contents The Miele Descaling Cartridge ............................................................................ Fitting and removing a descaling cartridge .................................................... Setting the start time for automatic descaling (Descaling timer) ........................ Canceling automatic descaling ........................................................................... Switching off automatic descaling ......................................................................
IMPORTANT SAFETY INSTRUCTIONS This coffee machine complies with all current safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating instructions carefully before using the coffee machine. They contain important information on the installation, safety, use and maintenance of the appliance. This prevents both personal injury and damage to the coffee machine.
IMPORTANT SAFETY INSTRUCTIONS Intended use This coffee machine is intended for household use. The machine is intended only for household use and for the preparation of drinks such as espresso, cappuccino, latte macchiato, tea, etc. All other types of use are not permitted. Do not use the coffee machine outdoors. This coffee machine must not be used at altitudes above 6560 ft (2000 m).
IMPORTANT SAFETY INSTRUCTIONS Safety with children Danger of burning and scalding at the dispensers. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensers. Keep the coffee system out of reach of children. Keep children away from the coffee machine and the power cord. Children should be supervised when they are near the coffee system.
IMPORTANT SAFETY INSTRUCTIONS Be certain your appliance is properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.
IMPORTANT SAFETY INSTRUCTIONS Do not place the coffee machine near a window in direct sunlight or right next to an appliance that gives off heat. This would subject the machine to ambient temperatures outside of its permitted range. Position the coffee machine at a height of at least 34" (850 mm) from the floor. Danger of overheating. Please ensure that there is adequate ventilation around the coffee machine. Do not cover the coffee machine with dish towels, etc. while it is in use.
IMPORTANT SAFETY INSTRUCTIONS - Any screw-in fuses in the household supply are fully unscrewed. Never open the outer casing of the machine. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults or electric shock. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or coffee machine in water or other liquid. Only use genuine Miele accessories.
IMPORTANT SAFETY INSTRUCTIONS Proper use Danger of burning and scalding at the dispensers. The liquids and steam dispensed are very hot. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. Hot liquid or steam could spatter from the spouts. Ensure that the main dispenser is clean and installed correctly. Water in the drip tray can also be very hot. Take care when emptying it.
IMPORTANT SAFETY INSTRUCTIONS Do not use oily beans or beans that have been treated with caramel, sugar, or other substances. Sugar and oil will damage the coffee system. Only fill the coffee chute with ground coffee beans. Do not use any flavored ground coffee. The sugar in the coffee will stick to and block the brew unit of the coffee system. The cleaning tablets for degreasing the brew unit will not remove this type of deposit.
IMPORTANT SAFETY INSTRUCTIONS Cleaning and care Clean the coffee machine and the milk flask daily, particularly before using for the first time. All parts of the milk system need to be cleaned thoroughly and regularly. Do not use a steam cleaner to clean this machine. Steam could reach electrical components and cause a short circuit. If you do not utilize the automatic descaling function, you will need to descale the coffee machine manually on a regular basis.
IMPORTANT SAFETY INSTRUCTIONS For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape, or other types of adhesive on the stainless steel surfaces. Stainless-steel surfaces are susceptible to scratching. Even magnets can cause scratches.
Caring for the environment Disposal of the packing material The packaging material protects the appliance from transport damage. The packaging materials used are selected from materials which are environmentally friendly for disposal and can therefore be recycled. Recycling the packaging material reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites. Your dealer will take the packaging material away.
Guide to the appliance a On/Off button b Back sensor button c Touch display d Cup heater e Water container f Bean system with 3 bean containers g Park position for milk pipework h Grinder setting i Ground coffee drawer with integrated coffee scoop j Brew unit k Height-adjustable main dispenser with lighting l Drip tray with lid and grounds container m Lower panel with drip tray cover 18
Guide to the appliance Rear of machine a Cover b Descaling cartridge holder c Adapter d Miele descaling cartridge 19
Guide to the appliance Milk flask and milk siphon a Milk container b Milk siphon c Milk tube Main dispenser in detail a Dispensers for coffee and milk b CupSensor c Hot water dispenser d Stainless steel cover 20
*INSTALLATION* Unpacking and installing Unpacking the coffee machine Unpack the coffee machine. - Vacuum cleaner attachment for cleaning the ground coffee chute Remove any protective film and notices from the machine. Tip: Please retain the original box and styrofoam pieces so that you can pack the appliance securely, should you need to transport it in the future. The drip tray cover can be found in the accessories pack.
*INSTALLATION* Unpacking and installing - Do not place the coffee machine near a window in direct sunlight or right next to an appliance that gives off heat. This would subject the machine to ambient temperatures outside of its permitted range. - The coffee machine must be set up on a level surface. The surface must be water resistant. - The service panel must be opened completely to remove the brew unit. Place the coffee machine in the location you want to use it.
Operation Touch display Operating actions The delicate touch display can be scratched by pointed or sharp objects, e.g., pens. Only touch the display with your fingers. If your fingers are cold, the touch display may not react. Drinks You can only select options which are highlighted in light gray. Each time you tap a possible option the relevant field lights up partially or completely orange. Selecting or opening a menu Tap the field you want with your finger.
Operation Entering numbers Use the numerical keypad to enter numbers, e.g. if you want to set a timer duration. The numerical keypad will appear automatically in the relevant menus. Space Save Select the letters or characters you want. Tap Save. Tap the numbers you want. Once you have entered an accepted value, the OK field will light up green. Tap OK. You can delete one character at a time using the arrow button.
Operation Symbols in the display The following symbols may also appear in the display in addition to the text: Symbol Explanation This symbol indicates the Settings menu and the Language menu option. Some settings, e.g. display brightness and buzzer/keypad volume, are selected using a bar chart. This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the information. The Turn on at timer is activated (see “Settings – Timer”).
Operation Symbol Explanation This symbol and a fault code will appear if a fault occurs. The strength of the WiFi connection is shown under Settings | Miele@home | Connection status. Symbols represent the connection strength in increments from strong to not connected.
Before first use When you connect the coffee machine to the power supply, the following message will appear in the display: Miele – Willkommen. When you switch the coffee machine on for the first time, you will be prompted to set the following: - Language and country - Date - Time - Off: the display is dark when the machine is switched off. - Night dimming: the time and the date are displayed from 5:00 am to 11:00 pm. Select the time display and tap OK.
Before first use If you want to change the start time, tap Start time and select the required time. You can also change the start time for automatic descaling at a later time. Setting the water hardness Your local water authority will be able to tell you the hardness of the water in your area. The machine has four programmable hardness levels: °dH gr/gal ppm (mg/l CaCO3) Setting* 0 – 8.4 0 – 8.7 0 – 150 Soft 8.4 – 14 8.7 – 14.6 150 – 250 Medium 14 – 21 14.6 – 21.
Before first use Setting up the bean system After setting up the coffee machine, you will be prompted to set up the bean system. The coffee machine will assist you when first filling and naming the bean containers. Tap Yes. If you select No, the assistant for setting up the bean system will not be shown again. Filling the coffee bean container Tip: Open one bean container lid at a time to prevent the bean types from mixing when filling the bean system.
Before first use Any remaining drinks which have not been selected will be allocated to the third bean type. You have set up the bean system and you can now prepare drinks. To ensure that any coffee residues from the factory testing process are removed from the brewing system, please throw away the first 2 cups of coffee when using the coffee machine for the first time.
The bean system Coffee or espresso can be made from whole roasted coffee beans which are freshly ground for each cup. Your coffee machine has a bean system with three bean containers which can be filled with different types of beans or even just one type. You can allocate bean types to individual coffee drinks as you wish. Alternatively, you can create profiles with your own coffee drinks and allocate other bean types to these drinks which are different to the standard Miele profiles.
The bean system Changing the bean system settings (Type of beans) Tap Change name. The Drinks menu is displayed. Enter the name you want and then tap Save. Tap . Tap Settings and then Type of beans. Select a bean type. You can now change the name or allocation. Tip: If you want to allocate another type of bean to a coffee drink, you can also do this under Change parameters (see “Bean type” in the “Parameters” chapter). The Editor will open in the display.
The bean system If you do not allocate a type of bean, you will be asked what type of bean you want to use for the coffee as you make it.
Filling the water tank Risk to health due to contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Change the water in the water container every day. Risk of damage due to incorrect operation. Unsuitable liquids such as hot or warm water or other liquids can damage the coffee machine. Carbonated water leaves too much limescale in the coffee machine. Only use cold, fresh tap water to fill the water container.
Switching on and off Switching the coffee machine on Switching the coffee machine off Tap the On/Off button . Tap the On/Off button . The appliance heats up and rinses the pipework. Hot water will run out of the main dispenser. If coffee has been dispensed, the coffee machine will rinse the pipework automatically before switching off. You can now make drinks.
Dispenser adjustment The main dispenser cannot be manually adjusted. Before making the drink, the main dispenser moves down and the cup sensor stops it at the optimum height for the cups or glasses being used. Switching the dispenser adjustment on and off The Drinks menu is displayed. Tap . Tap Settings . Select Spout adjustment. Select the required option to switch dispenser adjustment on or off. Tap OK. The setting is saved. You can switch off dispenser adjustment.
Cup heating Danger of overheating due to Pre-heating cups insufficient ventilation. If the coffee machine is not sufficiently ventilated, the appliance can overheat. Ensure that there is sufficient ventilation around the coffee machine, e.g., do not cover cups on the cup heater with a dish towel. Cups should always be pre-heated to allow the flavor of the coffee to develop and be retained.
Making coffee with and without milk The following drinks without milk can be made: - Ristretto is a concentrated, stronger espresso. It is prepared with the same amount of coffee as for an espresso but with a lot less water. - Espresso is a strong aromatic coffee with a thick hazelnut-brown colored froth – known as the crema – on top. We recommend using espressoroasted coffee beans to make an espresso. - Coffee differs from espresso by the increased amount of water and the roast of the beans.
Making coffee with and without milk DoubleShot Select the DoubleShot function if you would like a particularly strong and aromatic coffee. In this case, more coffee beans will be ground and brewed halfway through brewing. The shorter extraction time means that fewer unwanted aromas and bitter compounds will be released. will appear while drinks are being made. DoubleShot can be activated for all drinks apart from “Ristretto” and “Long black”. Place a cup under each of the main coffee dispenser spouts.
Making coffee with and without milk Follow the instructions on the display. Each portion of coffee will be ground, brewed, and dispensed individually. You can follow the process on the display. Canceling Coffee Pot You can interrupt the dispensing process at any time. Tap Cancel. Making coffee drinks from ground coffee You can make coffee using ready ground coffee. This allows you to make a decaffeinated coffee even if the bean container is already filled with regular coffee beans, for example.
Making coffee with and without milk Fill the coffee scoop with ready ground coffee. Push the ground coffee drawer horizontally into the ground coffee chute. In order to not overfill the brew unit, place a maximum of 2 level scoops of coffee in the ground coffee chute. Turn the handle to the right to fill the brew unit with the ground coffee and to close the ground coffee chute. Close the service panel. Use ground coffee? will appear in the display. Making coffee with ground coffee Tap Yes.
Making coffee with milk The following drinks with milk can be made: - Capuccino consists of approx. 2 thirds milk froth and 1 third espresso. - Latte macchiato consists of 1 third each of hot milk, milk froth, and espresso. - Caffè Latte consists of coffee and hot milk. - Cappuccino Italiano has the same proportions of milk froth and espresso as a cappuccino. The difference is that the espresso is added first and then the milk froth.
Making coffee with milk You can prepare milk with the milk siphon or milk flask. There is one connecting piece included in the scope of delivery which can be inserted either into the milk siphon or into the milk flask lid. The appliance is supplied with the connecting piece already inserted into the milk flask lid. The connecting piece is easy to push out from the inside of the milk flask lid. Open the milk carton and dip the milk siphon into the milk. Place the milk carton next to the coffee machine.
Making coffee with milk The milk flask Milk is not cooled in the milk flask. For high-quality milk froth, always use cold milk (< 50°F/10°C). Place the milk flask next to the coffee machine. Insert the milk pipe into the lid of the milk flask and connect the flask to the coffee machine by attaching the pipe to the aperture in the main dispenser.
Tea Danger of burning and scalding on the hot water dispenser. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the hot water dispenser when hot liquids or steam are being dispensed. Do not touch hot components. This machine is not intended for commercial or scientific purposes. Temperatures given are approximate and can vary depending on the ambient conditions. When making tea, you can select from the following options: - Green tea approx.
Tea - Off: the TeaTimer is not displayed. Starting the TeaTimer appears in the bottom left of the display. Select the setting you want and confirm with OK. TeaTimer Making tea TeaTimer The hot water dispenser is located to the right of the main dispenser. Tap TeaTimer. Use the arrow button to display and select the types of tea. Different types of tea can be found in the drinks menu after Milk froth. The Drinks menu is displayed.
Tea The teapot will be filled. You can follow the process on the display. You can interrupt the dispensing process at any time: Tap Cancel.
Dispensing hot water Danger of burning and scalding on the hot water dispenser. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. The hot water has a temperature of approx. 195°F (90°C) when dispensed. The amount of hot water used can be adjusted depending on the size of the cup (see “Portion size”). The Drinks menu is displayed.
Parameters You can individually adjust the following parameters for each drink: The amount of coffee is too low if: - Amount of coffee - the espresso or coffee flows into the cup too quickly - Brewing temperature - the crema is very pale and uneven - Pre-brewing - the espresso or coffee lacks body - Bean type Increase the amount of coffee so that more ground coffee is brewed. Changing drink parameters The Drinks menu is displayed. The amount of coffee is too high if: Select Edit.
Parameters You can set a short or long duration for pre-brewing or turn the “Pre-brewing” function off completely. Bean type You can display which type of bean is saved for the coffee drink or change the allocation. Grinder setting When the beans are ground correctly, the coffee or espresso will flow evenly into the cup with a good crema. The perfect crema should have a hazelnut brown color. The grinder setting you select will be used for all coffee drinks.
Portion size The flavor of the coffee produced depends not only on the type of coffee, but also on the amount of water used. You can program the amount of water for all coffee drinks, hot water, and types of tea to suit the size of your cups and to suit the type of coffee you are using. This does not alter the amount of coffee used. For coffee drinks with milk you can also set the amount of milk or milk froth to suit your personal taste. You can also set the portion sizes for hot milk and milk froth.
Resetting drinks You can reset portion sizes and parameters back to their factory default settings for individual drinks or for all drinks. The Drinks menu is displayed. Resetting a drink Tap Reset drink. Select a drink. in the display. Tap Yes to confirm. 52 Tap Reset all drinks. Reset all drinks to default? the display. Tap Yes to confirm. Select Edit.
Profiles In addition to the Miele drinks menu (Miele profile), you can enter up to 10 individual profiles to cater for the tastes and preferences of different users. The portion quantities and parameters for coffee and milk drinks, hot water, and tea can be adjusted in each profile. The name of the current profile is shown in the top left of the display. - Delete profile if you want to delete a profile.
Profiles - When switched on: Each time the machine is switched on it will automatically select the Miele drinks menu regardless of which profile was selected before the machine was last switched off. Select the required option and tap OK.
Profiles: creating and processing drinks You can save frequently made drinks in a profile with your own individual settings (see “Profiles”). You can also change the names of your drinks and delete any unwanted drinks from your profile. You can save a maximum of ten drinks in a profile. Tap Change drink. Select a drink. You can now change the portion size, drinks parameters, or the names as described. Deleting a drink The Drinks menu is displayed.
Profiles: making drinks The Drinks menu is displayed. Tap Profiles. Select the profile you want. The name of the selected profile is shown in the top left of the display. You can now make the drink you want. Place a suitable container under the main dispenser. Select a drink. Dispensing will start.
Expert mode In Expert mode you can change the portion size while the drink is being made. The setting will not be saved and will only apply to the current drink. Dispensing Expert mode is not available if you have selected DoubleShot or two portions . Switching Expert mode on and off The Drinks menu is displayed. Tap . Stop Cancel Tap the bar and adjust the indicator (small triangle) as you wish. Select Settings and then Expert mode.
Settings You can use the “Settings” menu to customize the coffee system to suit your individual requirements. Some settings which can be found in the Settings menu are described in separate sections of the operating instructions. Accessing the Settings menu Changing and saving settings The Settings menu is displayed. Select the option you want to change. Select the setting you want and confirm with OK. The setting is saved. The Drinks menu is displayed. Language Tap .
Settings Clock format The following options are available: - Timer 1: Turn on at, Turn off at, Turn off after - 24-hour display (24 h) - Timer 2: Turn on at, Turn off at - 12-hour display (12 h (am/pm)) Turn on at Setting Set the hours and the minutes. If the coffee machine has been connected to a WiFi network and signed into the Miele@mobile app, the time will be synchronized based on the location setting in the Miele@mobile app.
Settings Allocating days of the week The selected day of the week will be marked by . Select the required day of the week. When all of the required days of the week are marked, tap OK. Activating and deactivating the timer If you have selected On or Night dimming for the time display: when Turn on at is activated for the timer, the symbol and the desired switch-on time will appear in the display 23:59 hours before.
Settings °dH gr/gal ppm Set(mg/l CaCO3) ting* 0–8.4 0 – 8.7 0–150 Soft 1 8.4– 14 8.7 – 14.6 150–250 Medium 2 14–21 14.6 – 21.9 250–375 Hard 3 > 21 > 375 Very hard 4 > 21.9 * The hardness levels shown in the display may differ from the hardness level designations in your area. You must follow the values in the chart to set the correct water hardness level for your area. Press until a relevant instruction appears in the display.
Settings Service Network configuration Evaporating the coffee system The settings for the WiFi network will be reset. You should remove any water from the pipework of the coffee machine (evaporate the machine) before it is stored for a long period of time or transported any distance (see “Transport”). Demo mode Do not activate this setting for domestic use. The Demo mode function enables the coffee machine to be demonstrated in stores or showrooms.
Networking Your coffee machine is WiFi enabled and can be operated via the Miele@mobile app using a mobile device, e.g. smartphone or tablet. Please ensure you adhere to the warning and safety instructions in these operating instructions, even when you are operating the coffee machine via the Miele@mobile app. Energy consumption increases when the coffee machine is connected to a WiFi network. This applies even when the coffee machine is switched off. Select Miele@home and then Set up.
Networking Connection successfully established appears when your coffee machine is connected to a WiFi network. Confirm with OK. Networking the coffee machine via WPS To use the Via WPS connection method, your router must have the WPS function. Select the connection method Via WPS. Follow the instructions on the display. Connection successfully established appears when your coffee machine is connected to a WiFi network. Confirm with OK.
Networking MobileStart Switching MobileStart on and off With MobileStart you can start making a drink, for example, via the Miele@mobile app. If you want to use MobileStart, the Remote control option must be switched on. Danger of burning and scalding at the dispensers. If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the main dispenser or touch hot components.
Networking RemoteUpdate The RemoteUpdate menu option is only displayed and can only be selected if the requirements for using Miele@home have been met. The RemoteUpdate function allows the software on your coffee machine to be updated. If an update is available for your coffee machine, it will automatically download it. Updates will not be installed automatically. They must be initiated manually. If you do not install an update, you can continue to use your coffee machine in the usual way.
Cleaning and care Risk to health due to inadequate cleaning. Heat and moisture inside the coffee machine can cause coffee residues to become moldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly.
Cleaning and care Clean by hand or in dishwasher The brew unit is not dishwasher safe. Only clean the brew unit by hand with warm water. Do not use any cleaning agents. The following components must be cleaned by hand only: Risk of damage as a result of excessively high dishwasher temperatures. Components may be ruined (e.g., may become warped) if washed in a dishwasher at temperatures higher than 130°F (55°C).
Cleaning and care Danger of burning and scalding Unsuitable cleaning agents on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Always allow the coffee machine to cool down before cleaning it. Please be aware that water in the drip tray can also be very hot.
Cleaning and care Cleaning the drip tray and grounds container Empty the drip tray and grounds container. Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. If the pipework has just been rinsed, wait a while before removing the drip tray. Please be aware that water in the drip tray can also be very hot.
Cleaning and care Clean the inside of the appliance underneath the drip tray. Replace the grounds container, the lid and the lower panel before pushing the drip tray back into the coffee machine. Make sure the drip tray has been pushed into the appliance as far as it will go. Cleaning the drip tray cover Remove the drip tray cover. The drip tray can be cleaned in the dishwasher, or by hand using warm water and a little liquid dish soap. Dry the drip tray cover. Refit the drip tray cover.
Cleaning and care Cleaning the water container Clean the water container every day. You can clean the water container in the dishwasher once a week. Make sure that the valve, the underside of the water container, and the surface the water container sits on are clean. Otherwise, the water container will not sit correctly. Remove the water container. The water container can be cleaned in the dishwasher, or by hand using warm water and liquid dish soap. Dry the water container after cleaning.
Cleaning and care Cleaning the main dispenser with integrated cappuccinatore With the exception of the stainless steel cover, all parts of the main dispenser should be cleaned in the dishwasher at least once a week. This will remove coffee deposits and milk residues effectively. Clean the main dispenser stainless steel cover by hand only using warm water and a little liquid dish soap. The Drinks menu is displayed. Remove the dispensing unit towards the front.
Cleaning and care Reassembling the main dispenser The dispensing unit is easier to reassemble if the individual parts are dampened with water beforehand. Reassemble the dispensing unit. Push the dispensing spouts firmly back onto the dispensing unit. Make sure that all parts are tightly connected to one another. Clean the surfaces of the main dispenser with a damp cloth.
Cleaning and care The cup sensor is released. Cleaning the milk siphon Clean the cup sensor. Clean the milk siphon every day. Refitting: Rinse the milk siphon under running water. Press the cup sensor from below into the holder on the main dispenser. Remove the connecting piece from the stainless steel tube. Clean the individual components in a dishwasher. Tip: Alternatively, you can soak the individual components overnight in water and liquid dish soap.
Cleaning and care The coffee machine milk pipe must be cleaned at least once a week. A message in the display will prompt you when this needs to be done. Confirm the message with OK. When you confirm the message Clean milk pipework with OK, the internal counter for the cleaning interval will be reset. You will not be reminded again. There are two options for cleaning the milk pipe: If necessary, you can remove the connecting piece and seal from the milk flask lid.
Cleaning and care Cleaning the bean system Risk of injury on the moving grinder. If you reach into the grinder or objects such as a spoon are left in the grinder and a grinding process is unintentionally started, you could be injured. Switch off the machine and disconnect it from the power supply before cleaning the bean system. Tip: Open one lid at a time to prevent mixing the bean types when filling the bean system.
Cleaning and care Vacuuming out the ground coffee chute In order to remove coffee residues properly from the grinder channel, you should vacuum out the ground coffee chute once a year with the vacuum cleaner attachment (supplied). Cleaning the casing If soiling is allowed to stay for a long time or there is contact with unsuitable cleaning agents, surfaces can alter or discolor. Remove any soiling immediately. Ensure that any splashes of descaling solution are wiped up immediately.
Cleaning and care Maintenance programs Rinsing the appliance The coffee machine has the following maintenance programs: If coffee has been dispensed, the coffee machine will rinse the coffee pipework automatically before switching off. This removes any residual coffee grounds. - Rinsing the appliance - Rinsing the milk pipe - Cleaning the milk pipe You can also rinse the pipework manually. - Degreasing the brew unit The Drinks menu is displayed. - Descaling the appliance Tap .
Cleaning and care Rinsing the milk pipe Cleaning the milk pipework Milk residues can block the milk pipe. The milk pipe should therefore be rinsed regularly. If a drink has been made using milk, the prompt to insert the end of the milk pipe into the drip tray will appear at the latest when you switch the machine off. For optimum cleaning results, it is recommended to use the Miele Cleaning Agent for milk pipework.
Cleaning and care Carrying out the cleaning process: Degreasing the brew unit and cleaning the interior Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine. Place the container next to the machine and hang the milk pipe in the cleaning solution. Make sure that it is sufficiently immersed in the cleaning solution. Tap OK.
Cleaning and care Degreasing the brew unit when prompted to do so No drinks can be made and Degrease the brew unit appears in the display. The maintenance program cannot be canceled. It must be completed through to the end. Tap OK. The maintenance program will then start. Carefully pull the brew unit out of the coffee machine. Once you have removed the brew unit, do not change the position of the handle on the brew unit. Otherwise the brew unit cannot be reinserted.
Cleaning and care Clean the interior of the coffee machine. Make sure that the areas highlighted in the illustration are cleaned especially well. Press the button on the end of the handle of the brew unit and while doing so turn the handle clockwise . Tip: Use your vacuum cleaner to remove dry coffee grounds. Close the service panel. The following will appear in the display: Fit brew unit with a tablet inside Follow the additional instructions given in the display.
Cleaning and care Depending on how you use your machine and the water hardness level in your area, occasionally you will need to descale your machine manually in addition to automatic descaling. If a descaling cartridge is not installed, an empty cartridge is installed, or an expired cartridge is installed, the machine needs to be descaled regularly using the Descale the appliance maintenance program. Descaling after prompt appears in the display Descale the appliance appears on the display.
Cleaning and care The descaling process is complete when rinsing has finished. You can now prepare drinks again. Add 1 descaling tablet to the water container. Fill the water container to the descaling symbol with lukewarm water. Follow the instructions for the mixing ratio carefully. It is important to fill the water container with the correct amount of water. Otherwise the descaling process will be canceled prematurely. Carrying out descaling Reinsert the water container.
Automatic descaling Risk of damage from splashes from the descaling solution. Sensitive surfaces and/or natural floors can suffer damage. Wipe up any spillages of descaling solution. When handling a cartridge which has already been filled with water, ensure that the descaling solution does not come into contact with sensitive surfaces. The coffee machine has an automatic maintenance program for descaling the machine.
Automatic descaling The Miele Descaling Cartridge Only use the Miele Descaling Cartridge for the automatic descaling program. Please note that the Miele Descaling Cartridge has a lifespan of approx. one year after it has been placed in the machine and filled with water for the first time. The date on which the descaling cartridge was installed and filled with water determines the oneyear shelf-life. Do not install a descaling cartridge which has already been used in another Miele coffee machine.
Automatic descaling Fitting and removing a descaling cartridge Risk of damage from splashes from the descaling solution. Sensitive surfaces and/or natural floors can suffer damage. When handling a cartridge which has already been filled with water, ensure that the descaling solution does not come into contact with sensitive surfaces. The coffee machine is switched on. Only then will the appliance detect the descaling cartridge. Pull the cartridge holder forwards. There is already a cartridge installed.
Automatic descaling Seal the descaling cartridge with the cap. The cap is located on the cartridge. Release it by snapping it off. Dispose of the used cartridge with your household waste. Fitting the descaling cartridge Insert the cartridge and push it upwards as far as it will go. Push the cartridge holder back and then close the cover. Follow the instructions on the display.
Automatic descaling Canceling automatic descaling You can cancel automatic descaling during the activation phase. Automatic descaling can be canceled at any time. In this case, you would need to descale the coffee machine using the descaling tablets (see “Descaling the appliance” in the “Cleaning and care” chapter). Tap the On/Off button . The time left in hours is shown in the display. Tap Cancel. The descaling solution is rinsed out of the pipework. Rinsing can take up to 5 minutes.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Messages in the display Error messages must be confirmed with OK, otherwise the message may reappear in the display even though the problem has been remedied.
Frequently Asked Questions Problem Possible cause and solution F73 or The brew unit cannot be positioned correctly. Switch the coffee machine off with the On/Off button . Remove the brew unit and clean it. Check the brew unit Push the coffee ejector of the brew unit into the correct position. Do not insert the brew unit. Close the service panel and switch the coffee machine on with the On/Off button . This will initialize the brew unit motor and put it back into the start position.
Frequently Asked Questions Problem Possible cause and solution F233 The cup sensor is not inserted or is incorrectly inserted. The stainless steel cover of the main dispenser was not installed properly, e.g. is tilting forwards slightly. If the main dispenser is moving upwards and the cup sensor is bumped, e.g. with a cup, the cup sensor loses its reference position. Confirm the message with OK. Switch the coffee machine off with the On/Off button .
Frequently Asked Questions Unusual performance of the coffee system Problem Possible cause and solution The lighting remains off The lighting has been switched off. after the coffee ma Switch the lighting on (see “Lighting” in the chine has been “Settings” chapter). switched on. The lighting is faulty. Contact Technical Service. The display remains dark when the coffee machine is turned on using the On/Off button . The On/Off button was not held for long enough.
Frequently Asked Questions Problem Possible cause and solution The coffee machine does not switch itself on even though the Turn on at setting has been activated for the timer. The system lock is activated. Deactivate the system lock. A day of the week has not been selected and/or the timer has not been activated. Check and change the timer settings. The coffee machine was not used after being switched on automatically three times in succession (vacation mode).
Frequently Asked Questions Problem Possible cause and solution The descaling cartridge is not installed. The coffee appears after machine needs descaling. switching on even Switch the coffee machine off with the On/Off though the container is button . Wait approx. one hour. filled and installed in the Switch the appliance back on again. As soon as machine. The appliance PreHeating appears, tap Mainten. and then select does not rinse. Descale the appliance. Descale the coffee machine.
Frequently Asked Questions Problem Possible cause and solution The grounds container is overflowing even though the drip tray and grounds container have been emptied following each reminder. The drip tray has probably been removed without the grounds container being emptied. Removing the drip tray resets the internal counter for emptying the grounds container. Always empty the grounds container if you remove the drip tray.
Frequently Asked Questions Problem Possible cause and solution Neither milk nor milk froth comes out of the main dispenser. The milk pipe is blocked. Clean the main dispenser and milk pipework carefully with the brush. A fan can be heard even though no drinks are being prepared and the coffee machine is switched off. This is not a fault. Once a drink has been dispensed or the machine has been switched off, the internal fan will continue to run until the interior is sufficiently dehumidified.
Frequently Asked Questions Faults with automatic descaling Problem Possible cause and solution After switching on, a message appears informing you that automatic descaling could not be carried out. If you have made drinks with milk, the milk pipe must be pushed into the drip tray and when the machine is switched off, the message about this in the display needs to be confirmed with OK. All removable parts, such as the water container, drip tray, brew unit, or main dispenser must be installed.
Frequently Asked Questions Unsatisfactory results Problem Possible cause and solution The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its sides, the more important it is to pre-heat it. Pre-heat the cup, e.g. using the cup heater (depending on model). The brewing temperature is set too low. Set a higher brewing temperature. The filters in the brew unit are blocked. Remove the brew unit and clean it by hand. Degrease the brew unit.
Frequently Asked Questions Problem Possible cause and solution The crema on the coffee or espresso is not as it should be. The grinder setting is not correct. Set the grinder to a finer or coarser setting. The brew temperature is too high for the type of coffee being used. Set a lower brewing temperature. The coffee beans are no longer fresh. Add fresh beans to the coffee bean container. The coffee tastes weak. The coffee grounds in the grounds container are sludgy and grainy.
Customer Service Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate.
Transport If the coffee system will not be used for an extended period of time, e.g. vacation, or will be transported over a long distance, the appliance should be prepared as follows. Select Evaporate and then Yes. Follow the instructions on the display.
Transport Clean the drip tray and grounds container. Vacuuming out the ground coffee chute using the attachment and cleaning the interior To ensure coffee residues are removed thoroughly, you should vacuum out the ground coffee chute before transporting and clean out the interior of the machine carefully. Insert the attachment supplied and use the suction wand of your vacuum cleaner to vacuum out the ground coffee chute. Remove the brew unit and clean the interior of the machine.
Accessories These products and other useful accessories can be ordered via the Miele Webstore, from Miele Service or from your Miele dealer.
Saving energy The following tips can help you save energy and money as well as help the environment: - Operate the coffee machine in “Eco mode” (pre-set). - Select a lower lighting setting or refrain from using lighting when the appliance is switched on. - Switch off the lighting switch-off time when the appliance is switched off. - Switch off the time display. - Energy consumption may increase if you change the factory default settings for the timer. This setting uses more energy appears in the display.
Electrical connection Before connecting the coffee machine, make sure that the connection data on the data plate (voltage and frequency) matches the domestic electrical supply. This data must match to prevent the coffee machine from being damaged. If in any doubt, consult a qualified electrician. The connection data is provided on the data plate. The data plate can be found on the left-hand side of the appliance when the drip tray is pulled out.
*INSTALLATION* Appliance dimensions 108
Technical data Electricity consumption in standby: < 0.4 W Electricity consumption in networked standby: < 0.9 W Pump pressure: max. 217 psi (15 bar) Through-flow heater: 1 stainless steel thermo block Dimensions (W x H x D): 11 1/4" x 16 9/16" x 17 1/2" (311 x 420 x 445 mm) Net weight: 31.3 lb (14.2 kg) Power cord length: 3' 11 1/4" (120 cm) Water container capacity: 2.2 l Total capacity of the bean containers: approx. 540 g Coffee bean container A: approx.
FCC Declaration of Conformity WiFi module EK037 Contains FCC ID: 2ACUWEK037 Contains IC: 5669C-EK037 This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Customer Service & Support Phone: 888-99-MIELE(64353) 888-586-8056 Fax: service@mieleusa.com International Headquarters Miele & Cie.
CM 7750 CoffeeSelect en – US, CA M.-Nr.
