Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Making coffee with milk
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray and grounds container
- Drip tray cover
- Water container
- Stainless steel water intake valve filter
- Main dispenser with cappuccinatore
- Stainless steel milk flask
- Milk pipework
- Bean container and ground coffee chute
- Housing
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework with the maintenance program
- Degreasing the brew unit and cleaning inside
- Descaling the machine
- Frequently Asked Questions
- Transport
- Technical Service
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Installation
82
Danger of overheating!
Please ensure that there is adequate
ventilation around the appliance.
Do not cover the appliance with dish
towels or similar objects while it is in
use.
Danger of overheating
If the coffee machine is installed be-
hind a kitchen furniture door, it may
only be used with the furniture door
open.
Do not close the furniture door while
the coffee machine is in use.
Please observe the following installation
instructions:
– The location of the appliance must be
dry and well ventilated.
– The ambient temperature of the room
in which the appliance is used must
be between +50°F and +100°F
(+10°C and +38°C).
– The coffee system must be set up on
a level surface. The surface must be
water resistant.
If the coffee system is installed in a
niche, the niche must provide the fol-
lowing minimum dimensions:
Height 20" 508mm
Width 17 11/16" 450mm
Depth 21 7/8" 555mm
When setting up the appliance: make
sure that the front of the appliance
can be fully opened so that the brew
unit can be removed with ease when
required.
The appliance must be set up in the
niche such that it sits flush with the
front edge of the niche.