Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Making coffee with milk
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray and grounds container
- Drip tray cover
- Water container
- Stainless steel water intake valve filter
- Main dispenser with cappuccinatore
- Stainless steel milk flask
- Milk pipework
- Bean container and ground coffee chute
- Housing
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework with the maintenance program
- Degreasing the brew unit and cleaning inside
- Descaling the machine
- Frequently Asked Questions
- Transport
- Technical Service
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Frequently Asked Questions
72
Problem Possible cause and solution
Coffee dispensing is re-
peatedly interrupted
and the message Fill the
bean container appears in
the display.
This is not a fault.
The brew unit does not sense the ground coffee.With
particular types of coffee, it can happen that too little
coffee is ground or the ground coffee is too fine. Usu-
ally the grinding – fine and the ground coffee quantity
– are set too low.
Confirm the message with OK.
Tip: If the coffee is too strong for you or it tastes bit-
ter, try another type of bean.
If the message appears during the preparation of all
coffee specialties:
Set the grinder to a coarser setting (see "Grinder
setting").
Check the settings for the amount of coffee for all
coffee specialties (see "Amount of coffee"). If nec-
essary, select a larger amount of coffee.
Also consider any changed drinks in "User profiles"
.
If the message only appears during the preparation of
selected coffee specialties:
Check the settings for the amount of coffee for this
coffee specialty (see "Amount of coffee"). Select a
amount of coffee.
You may also need to set a slightly coarser grinder
setting.
The descaling program
was started uninten-
tionally.
The descaling program cannot be stopped once the
OK button has been tapped.
Descaling must be continued through to completion.
This is a safety precaution to make sure the machine
is descaled correctly. This is important for the
longevity and functional efficiency of your coffee sys-
tem.
Descale the coffee system (see "Descaling").