Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Making coffee with milk
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray and grounds container
- Drip tray cover
- Water container
- Stainless steel water intake valve filter
- Main dispenser with cappuccinatore
- Stainless steel milk flask
- Milk pipework
- Bean container and ground coffee chute
- Housing
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework with the maintenance program
- Degreasing the brew unit and cleaning inside
- Descaling the machine
- Frequently Asked Questions
- Transport
- Technical Service
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Descaling the machine
65
Fill the water reservoir to the mark
with lukewarm water.
Place 1 descaling tablet in the water.
Follow the instructions for the mixing
ratio carefully. It is important that you
do not fill the water reservoir with too
much or too little water. Otherwise
the descaling process will be can-
celled prematurely.
Performing a descale
Replace the water reservoir.
Follow the instructions given in the
display.
When Rinse the water container and fill with
fresh tap water up to the descaling symbol
appears in the display:
Carefully rinse the water reservoir
with clean water. Ensure that no
descaling solution residue remains in
the water reservoir. Fill the water
reservoir to the mark with fresh tap
water.
The descaling program is finished at the
end of the rinsing cycle and drinks can
be made again.
To protect the appliance and sur-
rounding surfaces from damage,
make sure you wipe up any spills or
splashes of descaling agent immedi-
ately.
Descaling when not prompted
by a message
Tap .
Select Maintenance and tap OK.
Select Descale the appliance.
The descaling process cannot be can-
celled once you have tapped "OK."
The process has to be completed
through to the end.
TapOK.
The descaling process will begin.