Operating Instructions

Cleaning and care
56
Stainless steel milk flask
(CM 6350)
The milk flask should be taken apart
and cleaned every day.
 Clean all parts by hand only using
warm water and dishwashing liquid.
Use the cleaning brush supplied to
remove milk residue from the milk
pipework if necessary.
 Rinse all parts carefully under running
water.
Residual dishwashing liquid can affect
the taste of milk from the appliance
and the quality of the milk froth.
 Dry all parts thoroughly.
 Reassemble the milk flask.
Milk pipework
 Make sure that the milk pipework
is cleaned regularly and thoroughly.
Milk contains natural bacteria that
will multiply if the pipework is not
sufficiently clean. Contamination in
the coffee machine can be a health
hazard.
The milk pipework must be cleaned at
least once a week. A message in the
display will prompt you when this needs
to be done.
 Confirm the message with OK.
When you confirm the message Clean
milk pipework withOK, the internal
counter for the cleaning interval will be
reset. You will not be reminded again.
There are two options for cleaning the
milk pipework:
– You can remove and dismantle the
central spout with its integrated cap-
puccinatore and either wash it in the
dishwasher or by hand with hot water
and a little washing-up liquid (see
"Central spout with integrated cap-
puccinatore").
– Or you can clean the milk pipework
using the Clean milk pipework mainte-
nance program together with the
Miele cleaning agent for milk
pipework (see "Maintenance program
- Cleaning the milk pipework").