Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Making coffee with milk
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray and grounds container
- Drip tray cover
- Water container
- Stainless steel water intake valve filter
- Main dispenser with cappuccinatore
- Stainless steel milk flask
- Milk pipework
- Bean container and ground coffee chute
- Housing
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework with the maintenance program
- Degreasing the brew unit and cleaning inside
- Descaling the machine
- Frequently Asked Questions
- Transport
- Technical Service
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
User profiles
41
Selecting a user profile
This selection is only possible if a pro-
file has been allocated in addition to
the Miele standard user profile.
Use the arrow buttons to select
Select profile and tap OK.
Select the profile with the arrow but-
tons and tap OK.
The name of the current user profile is
shown at the top left of the display.
Changing the name
This selection is only possible if a pro-
file has been allocated in addition to
the Miele standard user profile.
Use the arrow buttons to select
Change name and tap OK.
Proceed the same as with "Create
profile":
– Select to delete a character.
– To enter new characters, highlight the
relevant character and confirm with
OK,
– Save the new name by selecting in
the display and tapping OK.
Deleting a user profile
This selection is only possible if a pro-
file has been allocated in addition to
the Miele standard user profile.
Use the arrow buttons to select
Delete profile and tap OK.
Select the profile you wish to delete.
TapOK.
A check will appear after the name
and the user profile will be deleted after
a short time.
Changing a user profile
You can program the coffee system so
that it changes back to the Miele stan-
dard profile automatically after each
drink is dispensed, so that the Miele
profile is always active when the appli-
ance is switched on or so that it retains
the most recently selected profile.
Select Change profile and tap OK.
You now have the following options:
– Manually: The selected user profile re-
mains active until you select another
user profile.
– After each use: The appliance will
change back to the Miele standard
user profile automatically after a drink
is dispensed.
– When turned on: Each time the appli-
ance is switched on it will automati-
cally select the Miele standard user
profile regardless of which user pro-
file was set before the appliance was
last switched off.
Select the required option and tap
OK.