User Manual

User profiles
36
(CM5410, CM5510, CM5710)
In addition to the Miele drinks menu
(Miele profile), you can create individual
profiles to cater for different tastes and
preferences.
The portion quantities and parameters
for all drinks can be adjusted in each
profile.
The name of the current profile is
shown in the top left of the display.
Creating profiles
 Touch the sensor control and
select User profiles. Confirm with OK.
The User profiles menu opens.
 Select Create profile.
The editor will open in the display.
 Enter the profile name:
- To enter a character, highlight a
character and confirm the selection
with OK.
- To delete a character, touch the
sensor.
- A name is saved by selecting the
tick and confirming with OK.
The profile is created.
Changing drinks in a profile
When you change the parameters
within a profile, these settings only
apply to the active profile. The settings
for drinks in other profiles are not
affected.
 Select the profile you want.
The name of the profile selected will be
shown in the top left-hand corner of the
display.
You can now change the drinks
individually.
Preparing User profile drinks
 Place a suitable cup or glass
underneath the central spout.
 Touch the sensor control and
select User profiles.
 Select the profile you want and
confirm withOK.
 Select the drink you want.
Drink preparation starts.
Changing a User profile name
This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.
 Select Change name with the arrow
sensors and touch OK.
 Proceed the same as with “Create
profile”:
- Select  to delete a character.
- To enter new characters, select the
relevant character and confirm with
OK.
- Save the new name by selecting  in
the display and touching OK.
Deleting a profile
This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.