User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Preparing the coffee machine for use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Adjusting the coffee dispensers to the cup height 18
- Canceling preparation 19
- Espresso or coffee 20
- Making coffee or espresso using ground coffee 21
- Specialty coffees with milk 23
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- _
- Cleaning and care 45
- Descaling 58
- Energy saving mode 60
- Frequently asked questions 61
- After sales service 71
- Accessories 72
- Transport 73
- Installation instructions 75
- Electrical connection 76
- Installation 77
- Dimensions 78
- Caring for the environment 79
The coffee machine is equipped with
portion programing. You can program
the amount of water used for each
portion of espresso, coffee or hot water
to suit your taste and cup size.
For drinks prepared with milk, you can
also set the duration of the steam used
for heating or frothing the milk. You can
also program the amount of hot milk
and froth.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum portion size possible for
that type of drink will then be saved.
There are two ways to program the
portion amount; either:
– when preparing a drink, or
– if you call up PROG. THE AMOUNT
in the SETTINGS menu.
If there is insufficient water in the
water container, the process will be
stopped. The portion size will not be
saved.
TIP You can cancel programming the
amount as long as CANCEL is visible in
the display.
Setting the serving size when
making a drink
Press the ., /, H or k button for at least
3 seconds to program the amount for
that particular drink.
For caffè latte, milk froth, hot milk and
hot water you can start portion size
programming by pressing the
OK button for at least 3 seconds after
selecting the drink
Setting portion size for espresso and
coffee
^ Place the desired cup under the main
dispenser.
^ Press and hold the . or / button until
PROG. THE AMOUNT appears in the
display.
The selected drink will be prepared and
SAVE will appear in the display.
^ Press the OK button when the cup
has been filled to the level you want.
The portion size programmed will now
be dispensed every time that particular
drink is selected.
Setting the serving size
31