Operating Instructions Freestanding coffee machine CM 5200 To prevent accidents and machine damage read these instructions before installation or use. en - US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Display and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Button illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Operation . . . . . . . . . . . . . . . . . . . . .
Contents The SETTINGS menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Possible setting options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Time of day and clock display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Timer functions . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Proper Use Please read these instructions carefully to prevent accidents and machine damage. This appliance complies with current safety requirements. Improper use of the appliance can cause personal injury and material damage. Read this safety information carefully before operating the appliance.
IMPORTANT SAFETY INSTRUCTIONS Children Caution! The coffee and hot water dispensers present a danger of burning or scalding! Children's skin is very sensitive and reacts to hot temperatures. ~ Keep the coffee system out of reach of children. ~ Close supervision is necessary when the coffee machine is used near children. ~ Be certain your appliance is properly installed and grounded by a qualified technician.
IMPORTANT SAFETY INSTRUCTIONS ~ Do not place the appliance on or near a hot gas or electric burner, or in a heated oven. ~ The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. ~ Protect the coffee machine from water and water spray. ~ Installation, maintenance and repairs may only be carried out by qualified technicians.
IMPORTANT SAFETY INSTRUCTIONS ~ Fill the bean container only with roasted whole coffee beans. Do not fill the bean container with coffee beans which have been treated or with ground coffee. ~ Do not reach into the grinder. ~ Only put ground coffee or cleaning tablets to the ground coffee chute. The cleaning tablets remove grease from the brew unit of the coffee machine. ~ Only use plain milk. Flavored milk products contain substances that can clog the milk system.
Guide to the machine a Cup warming surface h Drip tray cover b Bean container, ground coffee chute and rotary selector to control the fineness of the ground coffee i Milk tube aperture c Display and controls d Hot water spout e Central spout with integrated cappuccinatore f Waste container g Drip tray 8 j Main switch k Compartment for quick guide l Water container m Milk container (depending on model)
Guide to the machine Display and controls Drink buttons Rotary selector d Press these buttons to prepare the desired drink. You can select from the different menu options using the rotary selector. The symbols mean: On/Off button - c . Espresso b / Coffee a k Latte Macchiato g The On/Off button - turns the coffee machine on and off (Standby), if the main switch on the back is turned on. H Cappuccino f To prepare a drink, press the corresponding button once.
Guide to the machine Button illumination Calling up a menu When the drink buttons are illuminated, you are in the main menu and can prepare drinks. If drink preparation has commenced, only the corresponding drink button is illuminated. ^ You can call up menus by holding the OK button for more than 2 seconds The semicircle also lights up on the OK button shortly before the steam is produced, e.g. for milk froth.
Preparing the coffee machine for use Turning on for the first time Please read the operating instructions and take the time to familiarize yourself with the coffee machine before using it for the first time. When you turn the coffee machine on for the first time, you will be prompted to set the following after the welcome screen has appeared: – Language Before using for the first time – Time format ^ Set up the coffee machine and remove any protective film (see "Installation").
Preparing the coffee machine for use To set the time of day Water hardness ^ Turn the rotary selector until the current hour appears in the display. Press the OK button. Water hardness is an indication of the amount of minerals dissolved in water. The higher the mineral content, the harder the water. And the harder the water, the more often the coffee machine will need to be descaled. ^ Turn the rotary selector until the current minutes appear in the display. Press the OK button.
Preparing the coffee machine for use Determining the water hardness Setting the water hardness level You can test the water hardness with the supplied test strips. Your local water supplier will also be able to advise you on the water hardness in your area. SELECT TYPE OF DRINK will appear in the display. ^ Press the OK button until MENU appears in the display. ^ Turn the rotary selector until SETTINGS appears in the display. Press the OK button.
Filling the water tank The quality of the water used plays an important part in the overall quality of the coffee. The water tank should be emptied and filled with fresh, cold tap water. Hot or warm water, or other liquids could damage the coffee system. Do not use mineral water. Mineral water will cause lime scale deposits to build up in the machine, possibly damaging it. ^ Open the lid on the left hand side of the coffee system a. Pull the water tank up and out using the handle b.
Filling the coffee bean container Fill the coffee bean container with roasted espresso or coffee beans. Important: Only use roasted espresso or coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Important: Do not use coffee beans that have been treated with sugar, caramel or other substances. Do not put drinks containing sugar in the coffee bean container. Sugar will damage the machine. ^ Open the lid on the right of the coffee system a.
Turning the machine On / Off The On/Off button - (Standby) can be used to turn the coffee system on or off, if the main switch at the back of the machine is turned on. Turning on When the machine is turned on, it heats up and rinses out the pipework. This cleans and heats the pipework ready for coffee preparation. After rinsing, hot water will run into the drip tray.
Pre-heating cups Cups should always be pre-heated to allow the flavor of espresso and other coffee drinks to develop and be retained. The smaller the volume of coffee/espresso and the thicker the cup, the more important it is to pre-heat the cup. You can use the cup heating surface on the top of the coffee machine to pre-heat coffee cups and glasses. The cup heating function must be turned on. To switch cup heating on or off SELECT TYPE OF DRINK will appear in the display.
Adjusting the coffee dispensers to the cup height The coffee dispensers can be raised or lowered to the height of your cup. If the dispensers are closer the beverage will not cool down as quickly and the crema will have a better consistency. ^ Pull the coffee dispenser down to the same level as the rim of the cup. or ^ Push the dispenser up until there is enough room to fit a larger cup or mug underneath.
Canceling preparation Preparation can be canceled while STOP is showing in the display. To cancel the preparation of coffee or espresso, ^ press the OK button. Drink preparation will be canceled. To cancel the preparation of specialty coffees with milk or two portions of a drink, you can cancel – the preparation of the ingredients individually or – the preparation of the entire drink. To cancel an individual stage, e.g. milk froth, ^ press the OK button once.
Espresso or coffee Preparing espresso or coffee When the . or / buttons are pressed, the coffee system automatically grinds the beans to brew the coffee. SELECT TYPE OF DRINK will appear in the display. ^ Place a cup under the coffee dispensers. ^ To make an espresso press the . button. or ^ To make a coffee press the / button. The chosen beverage will now be dispensed.
Making coffee or espresso using ground coffee To make espresso or coffee using ready ground coffee, add a portion of ground coffee to the ground coffee chute. This allows you to prepare a decaffeinated coffee, if the bean container is already filled with regular coffee beans for example. The coffee machine will automatically recognize that ground coffee has been placed in the chute. Only one portion can be prepared at a time when using ready ground coffee.
Making coffee or espresso using ground coffee Making coffee or espresso using ground coffee You can now select whether you want to dispense a coffee or an espresso made with ground coffee. If no button is pressed within approx. 15 seconds, the ground coffee is emptied into the waste container. The following message appears in the display: SELECT DRINK USE GROUND COFFEE ^ Place a cup under the coffee dispensers. ^ To make an espresso press the . button. or ^ To make a coffee press the / button.
Specialty coffees with milk You can choose from a variety of specialty coffees. with milk Cappuccino consists of about two-thirds milk froth and one-third espresso. Stainless steel milk flask (depending on the model) The stainless steel milk container helps keep the milk cold for longer. Cold milk gives best results for milk froth. Latte macchiato consists of one-third each of hot milk, milk froth and espresso. Caffè latte consists of hot milk and coffee.
Specialty coffees with milk Making specialty coffees with milk Caution! Danger of burning and scalding from hot steam coming out of the cappuccinatore. The liquids and steam dispensed are very hot. The coffee machine heats up when a button is pressed to request a drink. HEATING-UP PHASE will appear in the display. Steam is then used to heat the milk in the cappuccinatore. It can also be frothed if milk froth is required.
Specialty coffees with milk Specialty coffees using ground After dispensing milk coffee You can also make cappuccino, latte macchiato or caffè latte from ground coffee. ^ Fill the ground coffee chute with ground coffee (see "Espresso or coffee from ground coffee"). When SELECT TYPE OF DRINK USE GROUND COFFEE appears in the display, ^ you can make cappuccino or latte macchiato at the touch of a button. Warning! Bacteria can cause infection.
Preparing hot water You can make hot drinks or preheat cups using the hot water function. Caution! Danger of scalding and burns. The water dispensed is very hot. SELECT TYPE OF DRINK will appear in the display. ^ Place a suitable container under the hot water spout. ^ Press the OK button until MENU appears in the display. ^ Turn the rotary selector until OTHER DRINKS appears in the display. Press the OK button. ^ Select HOT WATER with the rotary control. Press the OK button.
Adjusting the grinder setting You can customize the coffee machine to suit the type of coffee used. You can: To avoid damaging the grinder: – adjust the grinder setting, only ever adjust the grinder by one setting at a time. – change the amount of coffee, – pre-brew the freshly ground coffee, and Grind the coffee beans again if you want to adjust the grinder to the next setting. – set the brewing temperature. Grinder setting ^ Place a suitable container under the coffee dispensers.
Adjusting the strength of the coffee Amount of coffee The coffee machine can grind and brew 6-14 g of coffee per cup. The greater the quantity, the stronger the coffee or espresso. There are various ways to tell whether the amount of coffee is set correctly. The amount of coffee is too low, if – espresso or coffee flows into the cup too quickly. – the crema is very pale and uneven. – the espresso or coffee lacks body. Increase the amount of coffee so that more ground coffee is brewed.
Pre-brewing the coffee Pre-brewing the coffee When the pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavor of the coffee. The pre-brewing function can be turned on or off. The machine is delivered with pre-brewing switched off. SELECT TYPE OF DRINK will appear in the display. ^ Press the OK button until MENU appears in the display.
Brewing temperature Brewing temperature The ideal brewing temperature depends on the type of coffee, and whether espresso or coffee is being prepared. You can set different temperatures for espresso and coffee There is a choice of three brewing temperatures: – low – normal – high TIP Not all types of coffee can withstand a high temperature. Certain types are too delicate - the crema on top would not be as good and the taste would be impaired. SELECT TYPE OF DRINK will appear in the display.
Setting the serving size The coffee machine is equipped with portion programing. You can program the amount of water used for each portion of espresso, coffee or hot water to suit your taste and cup size. For drinks prepared with milk, you can also set the duration of the steam used for heating or frothing the milk. You can also program the amount of hot milk and froth. There is a maximum amount which can be programmed for each type of drink. Preparation stops when this is reached.
Setting the serving size Setting portion size for cappuccino and latte macchiato Setting portion size for caffè latte, milk froth, hot milk and hot water ^ Place the desired cup under the main dispenser. SELECT TYPE OF DRINK will appear in the display. ^ Press the H or k button for at least 3 seconds. ^ Place a suitable container under the main dispenser. The ingredients of the drink are now displayed and their respective quantities can be changed.
Setting the serving size Setting the serving size from the SETTINGS menu SELECT TYPE OF DRINK will appear in the display. ^ Press the OK button until MENU appears in the display. ^ Turn the rotary selector until SETTINGS appears in the display. Press the OK button. r SETTINGS PROG. THE AMOUNT s ^ Select PROG. THE AMOUNT and press the OK button. ^ Use the rotary selector to select the drink for which you want to set the portion size. ^ Turn the rotary selector until START appears in the display.
The SETTINGS menu You can use the SETTINGS menu to customize the coffee machine to suit your personal requirements. Calling up the SETTINGS menu ^ Press the OK button for 2 seconds. r MENU SETTINGS s ^ Turn the rotary selector until SETTINGS appears in the display. ^ Press the OK button. Now you can adjust the settings, display information or check current settings. Options which are currently selected will have a check B next to them.
The SETTINGS menu Possible setting options The factory setting for the currently selected option is shown in bold.
The SETTINGS menu Option Available settings Info Total portions Coffee drinks Espresso Coffee Cappuccino Latte Macchiato Caffè Latte Milk froth Hot Milk Hot water No.
The SETTINGS menu Language Time of day and clock display SELECT TYPE OF DRINK will appear in the display. If you are operating the coffee machine in Comfort mode you can set the time of day and the time format in the clock display in the SETTINGS menu. ^ Press the OK button until MENU appears in the display. The clock can be displayed as: ^ Turn the rotary selector until SETTINGS appears in the display. Press the OK button.
The SETTINGS menu ^ Select 24 H, if you want the time to be shown as a 24 hour clock. or ^ Select 12 H, if you want the time to be shown as a 12 hour clock. ^ Press the OK button. The setting is now saved. To set the time of day ^ Select SET and press the OK button. ^ Turn the rotary selector until the current hour appears in the display. Press the OK button. ^ Turn the rotary selector until the current minutes appear in the display. Press the OK button. The setting is now saved.
The SETTINGS menu Setting the timer SELECT TYPE OF DRINK will appear in the display. ^ Press the OK button until MENU appears in the display. ^ Turn the rotary selector until SETTINGS appears in the display. Press the OK button. r SETTINGS TIMER s ^ Select TIMER and press the OK button. ^ Turn the rotary selector until SET appears in the display. Press the OK button. The timer function must be activated for the coffee machine to switch on at the desired time (see "To activate and deactivate the timer").
The SETTINGS menu Switch off after To activate and deactivate the timer If none of the buttons has been pressed or no drink has been prepared, the coffee machine will turn itself off after one hour to save energy. If you have activated the "Switch on at" option for the timer, c will appear in the display when the coffee machine is in Standby mode. You can change this timer function setting for "Switch off after" to another time between 15 minutes and 9 hours.
The SETTINGS menu Operating modes To select the operating mode You can operate the coffee machine in Eco mode or in Comfort mode. SELECT TYPE OF DRINK will appear in the display. The Eco mode is an energy-saving mode. The coffee machine will switch to energy saving mode if it has not been used to prepare a drink for some time. The coffee machine will heat up again when a button is pressed. The "Switch on at" and "Switch off at" timer functions are not available in Eco mode.
The SETTINGS menu To display information To lock the coffee machine In the menu option INFO the number of portions prepared for each individual drink can be displayed. You can lock the coffee machine to prevent it being used without your knowledge, by children, for example. You can also see whether more than 50 portions can be dispensed before the machine needs to be descaled (NO. PORTIONS UNTIL DESCALING). SELECT TYPE OF DRINK will appear in the display.
The SETTINGS menu When the coffee machine is switched off it is locked and drinks cannot be dispensed. To deactivate the system lock temporarily You can deactivate the system lock temporarily, if you want to prepare drinks, for example. ^ Press the OK button for 3 seconds . You can now prepare drinks. As soon as you turn the coffee machine off, the system lock will be activated again and the coffee machine is locked again.
The SETTINGS menu Demo mode Do not activate this setting for domestic use. The coffee machine can be demonstrated in the showroom or at exhibitions in "demo mode". In this mode the machine lights up, but no drinks are prepared or actions carried out. To activate demo mode ^ Follow the instructions given in the display. ^ Confirm the messages DEMO MODE ACTIVE and MACHINE HEATING DEACTIVATED with the OK button. Demo mode is active. To deactivate demo mode ^ Turn the coffee machine off with the main switch.
Cleaning and care Quick guide The coffee system must be cleaned regularly to prevent a build-up of bacteria.
Cleaning and care Danger of burning and scalding on hot components or by hot liquids! Always allow the coffee machine to cool down before cleaning. Note that the water in the drip tray can be very hot. Do not use a steam cleaner to clean the coffee machine. The steam could cause a short circuit.
Cleaning and care Rinsing the system Rinsing the milk system The coffee machine rinses itself when it is turned on. This means that the pipes are pre-heated with warm water ready for you to prepare a delicious coffee drink immediately. If a coffee drink has been prepared, the coffee machine also rinses itself before turning off. This removes any remaining coffee residue. Rinsing the system manually SELECT TYPE OF DRINK will appear in the display. ^ Press the OK button until MENU appears in the display.
Cleaning and care The following will appear in the display: RINSING THE MILK SYSTEM START ^ Press the OK button. Cleaning the milk system Caution! Bacteria can cause infection. It is important to clean the milk system regularly to avoid the risk of bacteria building up.
Cleaning and care Dismantling and cleaning the milk system The milk system can be cleaned in the dishwasher or by hand using hot water and liquid dish soap. Place the individual components in the dishwasher for thorough cleaning. ^ Pull the coffee dispensers all the way down. ^ Dismantle the integrated cappuccinatore. Clean all components thoroughly. If the milk tube is blocked, clean under running water with the brush supplied.
Cleaning and care Now re-assemble the cappuccinatore: ^ Reassemble the integrated cappuccinatore. ^ Turn the rotary selector until MAINTENANCE appears in the display. Press the OK button. ^ Select CLEAN MILK SYSTEM and press the OK button. ^ Select START and press the OK button. ^ Push the integrated cappuccinatore into the central spout. Push hard until the dispensers are correctly located under the spout edge. ^ Replace the stainless steel cover and then push the central spout back up into position.
Cleaning and care Cleaning the stainless steel milk flask (depending on the model) The milk flask should be taken apart and cleaned every day. ^ Clean all parts by hand only using hot water and liquid dish soap. If necessary, a small brush can be used to remove any stubborn milk deposits. ^ Rinse all parts carefully under running water. Traces of dish soap can affect the taste and quality of the milk froth. Dry all parts thoroughly. ^ Reassemble the milk flask.
Cleaning and care Drip tray cover ^ Remove the drip tray cover from the drip tray. ^ The drip tray cover can be cleaned in the dishwasher or by hand using hot water and liquid dish soap. ^ Dry the drip tray cover thoroughly Drip tray and waste container Clean the drip tray and waste container every day every day to avoid unpleasant smells and mildew. The waste container is located in the drip tray.
Cleaning and care Waste container Make sure that the metal contact discs on the drip tray are cleaned and dried properly. The discs will not be able to detect that the drip tray is full if they are dirty or damp. The waste container will usually contain some residual water from the rinsing process ^ Push the coffee dispensers up as far as they will go. ^ Clean the space under the drip tray. ^ Replace the waste container in the drip tray and push the drip tray back into the coffee machine.
Cleaning and care Bean container and ground coffee chute Disconnect the coffee machine from the power supply before cleaning. TIP Use a vacuum cleaner to remove any dry coffee residues from the bean container and the ground coffee chute. Brew unit Clean the brew unit by hand only using hot water. Do not use soap. The moving parts of the brew unit are lubricated. Soap will damage the brew unit. Clean the brew unit once a week. ^ Open the lid on the right hand side of the coffee machine.
Cleaning and care ^ Carefully pull the brew unit out of the coffee machine. To replace the brew unit, repeat the previous steps in the reverse order: If you cannot remove the brew unit easily, the brew unit is not in the correct position (see "Frequently asked questions"). ^ Push the brew unit back into the coffee machine, making sure it is straight. After the brew unit has been removed, do not alter the position of the brew unit handle.
Cleaning and care Cleaning the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. Use the cleaning tablets supplied to clean the brew unit. These have been specially formulated for use in the coffee maker to optimize the degreasing. They are available from Miele. TIP Place a suitable container underneath the coffee dispensers. Then you don't have to empty the drip tray so often.
Cleaning and care Exterior Remove any soiling promptly. The surfaces can become discolored or otherwise altered if soiling is not removed right away. Make sure that no water gets in behind the display. The exterior surfaces are susceptible to scratching. Contact with unsuitable cleaning agents could cause discoloration. Do not dry the mat surfaces of black machines with a tea towel or similar. The surface can become darker and more shiny.
Descaling Limescale builds up in the coffee machine during use. The limescale buildup in the machine will depend on the hardness of your local water supply. Limescale must be removed regularly. The machine will guide you through the descaling process. Various instructions will appear in the display, e.g. you will be prompted to empty the drip tray, fill the water container, etc. Descaling must be carried out. The program takes approx. 30 minutes.
Descaling Be sure to mix water and descaling tablets in the right proportions. It is important that you fill the water container with enough water. Too little water can cause the descaling program to be stopped prematurely. After descaling the machine carefully, rinse the water container and the drip tray to remove all traces of descaling agent. Selecting Descale from the MAINTENANCE menu ^ Replace the water container in the coffee machine. ^ Press the OK button until MENU appears in the display.
Energy saving mode Eco-Mode Turning off When using Eco Mode the coffee system will save energy. If the machine will not be used for an extended period of time, turn it off using the main switch at the back of the machine. The coffee system will switch to Eco mode if it has not been used to prepare a drink in some time. When in Eco mode the heat function is not on constantly, therefore reducing energy usage. The coffee system will heat up again when a drink is selected.
Frequently asked questions ,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage. Do not open the outer casing of the coffee system. You can easily resolve many of the minor problems yourself. In some cases, an appropriate message appears in the display. To address the fault, follow the instructions on the display.
Frequently asked questions Message Possible cause and solution FAULT - 74 ^ Turn the machine off and then back on again. If the fault message appears in the display again, ^ contact Miele Technical Service. The following appears in the display, even though the drip tray is empty: The drip tray is not seated correctly EMPTY THE DRIP The metal contacts are dirty. ^ Clean and dry the contacts. TRAY ^ Push the drip tray into the coffee system into it clicks into place.
Frequently asked questions Message Possible cause and solution The following appears in the display although the water container is full: The water tank is not seated correctly. ^ Remove the water container and then replace it. If the fault message appears in the display again, ^ empty the water container. FILL WATER CONTAINER AND PLACE IN THE MACHINE ^ Check to see that the float moves freely, by shaking the water container.
Frequently asked questions Message Possible cause and solution The message The coffee machine needs descaling and/or the brew unit filters are blocked. SYSTEM FILLING UP - START appears in the display again. ^ Turn the machine off with the On/Off - button. ^ Press the OK button for 2 seconds and call up MAINTENANCE - DESCALE. ^ Descale the coffee machine. ^ Remove the brew unit and rinse it under running water (see "Brew unit").
Frequently asked questions Unsatisfactory results Problem Possible cause and solution Water is dispensed from the coffee dispensers when coffee has been selected. The ground coffee chute lid was opened and closed without coffee being put into it. YES was then selected when the GROUND COFFEE option appeared in the display. ^ If ground coffee has not been added to the ground coffee chute, NO must be selected when prompted to use GROUND COFFEE.
Frequently asked questions Problem Possible cause and solution The coffee or espresso is not hot enough The cup has not been pre-heated. ^ Pre-heat the cups (see "Pre-warming cups"). or The brewing temperature is set too low. ^ Set a higher brew temperature (see "Brewing temperature"). or The brew unit filters are blocked. ^ Clean the brew unit (see "Brew unit"). ^ Degrease the brew unit (see "Cleaning the brew unit"). The crema on the coffee or espresso is "not right".
Frequently asked questions Unusual performance of the coffee machine Problem Possible cause and solution The brew unit filters are blocked. When a drink is selected very little or ^ Clean the brew unit (see "Brew unit"). nothing at all is dispensed from the ^ Degrease the brew unit (see "Cleaning the brew unit"). coffee dispensers. Water has stopped flowing when programming the amount. The maximum water quantity possible was reached. Preparation is stopped and the max. portion size possible is saved.
Frequently asked questions Problem Possible cause and solution When the coffee The main switch is turned off ("0"). system is turned on ^ Set the main switch to on ("I"). using the - button the display remains dark. or The machine is not properly plugged into the outlet. ^ Insert the plug into the electrical outlet. or The circuit breaker has tripped due to a problem with the coffee machine, the electricity supply or another machine. ^ Remove the power plug from the electrical outlet.
Frequently asked questions Problem Possible cause and solution The coffee machine does not turn on at the programmed and activated "Switch on at" time. The system lock is activated. ^ Deactivate the system lock. See "System lock". or The coffee system was not used after being turned on three times in a row automatically. ^ Turn the machine on and prepare a drink. or Eco mode is activated. The timer function is not available in this mode. ^ Select Comfort mode (see "Operating modes").
Frequently asked questions Problem Possible cause and solution The brew unit cannot be removed, or the brew unit cannot be replaced in the coffee system The brew unit or the brew unit motor is not in the correct position. This can happen if the brew unit or the drip tray is pulled out while brewing is taking place. ^ Turn the machine off with the On/Off - button. ^ Press the . and / buttons at the same time. Then press the OK button twice.
After sales service Repairs In the event of a fault which you cannot correct yourself please contact the Miele Service Department by phone number at the back of this booklet. ^ Please quote the model type and number of your appliance. These can be found on the data plate located behind the drip tray inside the coffee system.
Accessories The following accessories are included with your coffee system depending on the model: – Measuring spoon for ground coffee – Integrated cappuccinatore as a spare part – Cleaning tablets to clean/degrease the brew unit – Descaling tablets for descaling the water pipework – Test strips to determine the water hardness level – Cleaning brush for cleaning the milk tube – Milk flask for storing and keeping milk cool longer These products and other useful accessories can be ordered on the Internet at
Transport If the coffee machine will not be used for an extended period of time, e.g. vacation, or will be transported over a long distance, the machine should be prepared as follows. Caution! Danger of scalding and burns. Hot steam will escape from the cappuccinatore. Please note: The evaporation process is complete when the message goes out.
Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information.
Electrical connection All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. Verify that the voltage, load and circuit rating information found on the data plate match the household electrical supply. This data must match to prevent damage to the coffee system. If in doubt, consult a licensed electrician.
Installation Danger of overheating! Ensure that there is sufficient ventilation around the coffee system. Be sure the vents at the top of the machine are not covered completely. Danger of overheating. If the coffee system is installed behind a cabinet door, it may only be used with the door open. Do not close the cabinet door while the coffee system is in use.
Dimensions 78
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
Alteration rights reserved / 1512 M.-Nr. 09 319 110 / 00 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
