Product Manual

Table Of Contents

Unusual performance of the coffee machine

Problem Possible cause and solution

When a drink is

selected very little or

nothing at all is

dispensed from the

coffee dispensers.

The brew unit filters are blocked.

Clean the brew unit (see "Brew unit").

Degrease the brew unit (see "Cleaning the brew unit").

Water has stopped

flowing when

programming the

amount.

The maximum water quantity possible was reached.

Preparation is stopped and the max. portion size possible

is saved.

There was not enough water in the water tank. The

programming process is canceled and the setting will not

be saved

^ Fill the water container.

^ Repeat the programming procedure.

The coffee machine

does not rinse itself

when turned on.

This is not a fault.

If the coffee machine still has an operating temperature

higher than 140 °F (60°C), rinsing will not take place.

There is a lot of

"coffee water" in the

waste container.

The grind level is too coarse.

Set the grinder control to a finer setting (see "Adjusting

the grinder setting").

Adjust the amount of coffee, if necessary (see "Adjusting

the strength of the coffee").

Frequently asked questions