Product Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Preparing the coffee machine for use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Adjusting the coffee dispensers to the cup height 18
- Canceling preparation 19
- Espresso or coffee 20
- Making coffee or espresso using ground coffee 21
- Specialty coffees with milk 23
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- _
- Cleaning and care 45
- Descaling 58
- Energy saving mode 60
- Frequently asked questions 61
- After sales service 71
- Accessories 72
- Transport 73
- Installation instructions 75
- Electrical connection 76
- Installation 77
- Dimensions 78
- Caring for the environment 79
Message Possible cause and solution
The message
SYSTEM
FILLING UP - START
appears in the display
again.
The coffee machine needs descaling and/or the brew
unit filters are blocked.
^
Turn the machine off with the On/Off - button.
^
Press the OK button for 2 seconds and call up
MAINTENANCE - DESCALE.
^
Descale the coffee machine.
^
Remove the brew unit and rinse it under running
water (see "Brew unit").
If the fault message appears in the display again,
^ Degrease the brew unit (see "Cleaning the brew
unit").
If the fault still appears in the display, contact Miele
Technical Service.
The following message is
displayed after turning
on:
RINSE THE
MILK SYSTEM
The milk system was not rinsed prior to turning off last
time.
^ Rinse the milk system (see "Rinsing the milk
system").
CLEAN THE MILK
SYSTEM
appears in the display.
The milk system needs to be cleaned.
^
Confirm this message by pressing the OK button.
^
Clean the milk system (see "Cleaning the milk
system").
DEMO MODE IS ACTIVE
or
DEMO MODE ACTIVE
FUNCTION DEACTIVATED
appears in the display.
The demo setting of the coffee machine for
showrooms or dealers has been activated.
^
Deactivate the demo mode (see "Demo mode").
Frequently asked questions
64