Product Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Preparing the coffee machine for use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Adjusting the coffee dispensers to the cup height 18
- Canceling preparation 19
- Espresso or coffee 20
- Making coffee or espresso using ground coffee 21
- Specialty coffees with milk 23
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- _
- Cleaning and care 45
- Descaling 58
- Energy saving mode 60
- Frequently asked questions 61
- After sales service 71
- Accessories 72
- Transport 73
- Installation instructions 75
- Electrical connection 76
- Installation 77
- Dimensions 78
- Caring for the environment 79
Message Possible cause and solution
The following
appears in the
display although the
water container is
full:
FILL WATER
CONTAINER
AND PLACE IN
THE MACHINE
The water tank is not seated correctly.
^
Remove the water container and then replace it.
If the fault message appears in the display again,
^
empty the water container.
^ Check to see that the float moves freely, by shaking the
water container.
^ Fill the water container with fresh, cold tap water and
replace it in the coffee system.
If the fault still appears, contact Miele Technical Service.
Dispensing stops
and the following
appears in the
display:
PROCESS STOPPED
WATER CONT. EMPTY
There is not enough water in the water container.
^
Fill the water container.
^
Press the OK button.
CONTINUE DISPENSING - YESB appears in the display.
^
Press the OK button to continue dispensing,
or select NO to cancel the preparation.
Frequently asked questions
63