Product Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Preparing the coffee machine for use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Adjusting the coffee dispensers to the cup height 18
- Canceling preparation 19
- Espresso or coffee 20
- Making coffee or espresso using ground coffee 21
- Specialty coffees with milk 23
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- _
- Cleaning and care 45
- Descaling 58
- Energy saving mode 60
- Frequently asked questions 61
- After sales service 71
- Accessories 72
- Transport 73
- Installation instructions 75
- Electrical connection 76
- Installation 77
- Dimensions 78
- Caring for the environment 79
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Do not open the outer casing of the coffee system.
You can easily resolve many of the minor problems yourself.
In some cases, an appropriate message appears in the display. To address the
fault, follow the instructions on the display.
Messages in the display
Message Possible cause and solution
FAULT - 1
FAULT - 2
FAULT - 82
The coffee machine has overheated.
^ Turn the machine off with the On/Off - button. Wait
approx. one hour and then turn it on again.
^ If the fault still appears, contact Miele Technical Service.
FAULT - 28
There is too much ready ground coffee in the ground
coffee chute.
If more than one level scoop is put into the ground coffee
chute the brew unit cannot process it. The ground coffee
will be directed into the waste container, and a Fault will
appear in the display.
^ Turn the machine off with the On/Off - button. Wait
approx. 2 minutes and then turn it on again.
FAULT - 73
The brew unit cannot be positioned correctly.
^ Turn the coffee system off using the main switch at the
back of the machine. After a few seconds turn the coffee
system back on.
^ Press the . and / buttons at the same time. Then press
the OK button twice.
This will initialize the brew unit motor and put in back into
the start position.
^ If the fault message appears in the display again,
contact Miele Technical Service.
Frequently asked questions
61