Product Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Preparing the coffee machine for use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Adjusting the coffee dispensers to the cup height 18
- Canceling preparation 19
- Espresso or coffee 20
- Making coffee or espresso using ground coffee 21
- Specialty coffees with milk 23
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- _
- Cleaning and care 45
- Descaling 58
- Energy saving mode 60
- Frequently asked questions 61
- After sales service 71
- Accessories 72
- Transport 73
- Installation instructions 75
- Electrical connection 76
- Installation 77
- Dimensions 78
- Caring for the environment 79
Be sure to mix water and descaling
tablets in the right proportions. It is
important that you fill the water
container with enough water. Too
little water can cause the descaling
program to be stopped prematurely.
^
Replace the water container in the
coffee machine.
Various messages will appear in the
display.
^
Follow the instructions given.
When FILL WATER CONTAINER AND
PLACE IN MACHINE appears in the
display,
^ Rinse the water container carefully
with clean water. Be sure that no
descaling agent is left in the water
container. Fill the water container
with cold, clean tap water up to the
"max." mark.
PROGRAM FINISHED will appear in the
display when the descaling process
has been completed.
^
Press the OK button.
^
Empty the drip tray.
The descaling program is now
complete and drinks can be prepared
in the machine again.
When descaling the machine be
sure to wipe away any splashes of
descaling agent immediately. These
could damage the surfaces.
After descaling the machine carefully,
rinse the water container and the drip
tray to remove all traces of descaling
agent.
Selecting Descale from the
MAINTENANCE menu
^
Press the OK button until MENU
appears in the display.
^
Turn the rotary selector until
MAINTENANCE appears in the
display.
Press the OK button.
^ Select DESCALE and press the
OK button.
The following will appear in the display:
DESCALE
r START s
The descaling program cannot be
canceled once is has started. The
program has to be carried through
to the end.
^
Press the OK button.
The descaling process will begin.
Descaling
59