Product Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Preparing the coffee machine for use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Adjusting the coffee dispensers to the cup height 18
- Canceling preparation 19
- Espresso or coffee 20
- Making coffee or espresso using ground coffee 21
- Specialty coffees with milk 23
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- _
- Cleaning and care 45
- Descaling 58
- Energy saving mode 60
- Frequently asked questions 61
- After sales service 71
- Accessories 72
- Transport 73
- Installation instructions 75
- Electrical connection 76
- Installation 77
- Dimensions 78
- Caring for the environment 79
^
Carefully pull the brew unit out of the
coffee machine.
If you cannot remove the brew unit
easily, the brew unit is not in the correct
position (see "Frequently asked
questions").
After the brew unit has been
removed, do not alter the position of
the brew unit handle.
This would displace the brew unit
and it would not fit back into the
coffee machine.
^ Clean the brew unit by hand under
hot running water without soap.
^
Wipe any coffee from the two filters.
One filter is located in funnel a and
the other to the left of funnel b.
^
Dry funnel area a to prevent ground
coffee sticking to it.
^
Clean the inside of the coffee
machine Use your vacuum cleaner to
remove dry coffee grounds.
To replace the brew unit, repeat the
previous steps in the reverse order:
^
Push the brew unit back into the
coffee machine, making sure it is
straight.
^ Press the button on the end of the
handle of the brew unit a and while
doing so turn the handle clockwise
b.
^ Close the door. Turn the flaps 90°
counterclockwise. Lower the flaps.
Cleaning and care
55