Product Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Preparing the coffee machine for use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Adjusting the coffee dispensers to the cup height 18
- Canceling preparation 19
- Espresso or coffee 20
- Making coffee or espresso using ground coffee 21
- Specialty coffees with milk 23
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- _
- Cleaning and care 45
- Descaling 58
- Energy saving mode 60
- Frequently asked questions 61
- After sales service 71
- Accessories 72
- Transport 73
- Installation instructions 75
- Electrical connection 76
- Installation 77
- Dimensions 78
- Caring for the environment 79
Danger of burning and scalding on
hot components or by hot liquids!
Always allow the coffee machine to
cool down before cleaning. Note
that the water in the drip tray can be
very hot.
Do not use a steam cleaner to clean
the coffee machine. The steam
could cause a short circuit.
To avoid damage to the surface do
not use the following:
– cleaning agents containing soda,
ammonia, acid or chloride,
– Solvent-based cleansers
– limescale removers,
– stainless steel cleaners,
– dishwasher detergent,
– oven cleaner,
– abrasive cleaning agents,
e.g. powder or cream cleansers,
pumice stones,
–
scouring pads, such as pot
scrubbers and sponges, or used
sponges that still contain abrasive
cleanser residue,
–
eraser sponges,
–
sharp metal scrapers,
In the MAINTENANCE menu you can
call up the different care programs and
change care settings.
Calling up the MAINTENANCE menu
^
Press the OK button for more than 2
seconds.
MENU
r MAINTENANCE s
^
Turn the rotary selector until
MAINTENANCE appears in the
display.
^
Press the OK button.
TIP If the coffee machine is turned off
at the On/Off - switch, you can also
call up the MAINTENANCE menu in
Standby. Press the OK button for more
than 2 seconds to do so.
Cleaning and care
46