Product Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Preparing the coffee machine for use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Adjusting the coffee dispensers to the cup height 18
- Canceling preparation 19
- Espresso or coffee 20
- Making coffee or espresso using ground coffee 21
- Specialty coffees with milk 23
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- _
- Cleaning and care 45
- Descaling 58
- Energy saving mode 60
- Frequently asked questions 61
- After sales service 71
- Accessories 72
- Transport 73
- Installation instructions 75
- Electrical connection 76
- Installation 77
- Dimensions 78
- Caring for the environment 79
Setting portion size for cappuccino
and latte macchiato
^
Place the desired cup under the main
dispenser.
^
Press the H or k button for at least
3 seconds.
The ingredients of the drink are now
displayed and their respective
quantities can be changed.
Cappuccino: milk froth, espresso
Latte macchiato: hot milk, milk froth,
espresso
^ Using the rotary selector select all
ingredients for which you wish to alter
the portion size. Confirm your
selection by pressing the OK button.
You can see from the check B next to
the relevant ingredient that portion size
can be set for this.
^ Turn the rotary selector until START
appears in the display.
Press the OK button.
The coffee machine starts making the
drink. When SAVE appears in the
display, portion sizes can be set for
each selected ingredient.
^
Press the OK button when the cup
has been filled to the level you want.
^
Save the portion size required for
selected ingredients.
The portion size and ingredients
programmed will now be dispensed
every time that particular drink is
selected.
Setting portion size for caffè latte,
milk froth, hot milk and hot water
SELECT TYPE OF DRINK will appear in
the display.
^
Place a suitable container under the
main dispenser.
^
Press the OK button until MENU
appears in the display.
^
Turn the rotary selector until OTHER
DRINKS appears in the display.
Press the OK button.
^
Use the rotary selector to select the
program you want.
^ Press the OK button until PROG. THE
AMOUNT appears in the display.
For Caffè latte the quantities for
individual ingredients – hot milk, coffee
– can be altered as described in
"Setting portion size for cappuccino
and latte macchiato".
For milk froth, hot milk and hot water,
proceed as described in "Setting
portion size for espresso and coffee.
Setting the serving size
32