Product Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Preparing the coffee machine for use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Adjusting the coffee dispensers to the cup height 18
- Canceling preparation 19
- Espresso or coffee 20
- Making coffee or espresso using ground coffee 21
- Specialty coffees with milk 23
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- _
- Cleaning and care 45
- Descaling 58
- Energy saving mode 60
- Frequently asked questions 61
- After sales service 71
- Accessories 72
- Transport 73
- Installation instructions 75
- Electrical connection 76
- Installation 77
- Dimensions 78
- Caring for the environment 79
The quality of the water used plays an
important part in the overall quality of
the coffee.
The water tank should be emptied
and filled with fresh, cold tap water.
Hot or warm water, or other liquids
could damage the coffee system.
Do not use mineral water. Mineral
water will cause lime scale deposits
to build up in the machine, possibly
damaging it.
^ Open the lid on the left hand side of
the coffee system a. Pull the water
tank up and out using the handle b.
^
Fill the water tank with fresh, cold tap
water to the "Max." mark.
Be sure the area under the water
tank is clean and free of
obstructions. If the water tank is not
seated correctly the drainage valve
will not be sealed. Clean if
necessary.
^ Replace the water tank. Make sure
the tank fits correctly onto the notch
at the top of the housing.
^
Close the lid.
Filling the water tank
14