Operating instructions Freestanding coffee machine CM 5100 To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en - GB, HK, SG, ZA M.-Nr.
Contents Packing material / Disposal of old machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Preparing the coffee machine for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Before using for the first time . . . . . . . . . . . . . . . . . . . . . .
Contents Setting the portion sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Programming the amount using the ., /, - or * button . . . . . . . . . . . . . . . . . . . . 32 Setting the portion sizes for espresso, coffee and hot water . . . . . . . . . . . . . . 32 Setting the duration of the steam used for hot milk and milk froth . . . . . . . . . . 33 Selecting the PROG. THE AMOUNT option in the SETTINGS menu . . . . . . . . . . . 33 The SETTINGS menu . . . .
Contents Descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Selecting the Descale option in the MAINTENANCE menu . . . . . . . . . . . . . . . . . 56 Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Accessories . . . . . . . . . . . . . . . . . . . . . . . . .
Packing material / Disposal of old machine Packing material Disposing of your old machine The packing material protects the machine during transit. Electrical and electronic machines often contain materials which, if handled or disposed of incorrectly could be potentially hazardous to human health and to the environment. They are, however, essential for the correct functioning of your machine. Please do not therefore dispose of it with your household waste.
Guide to the machine a Cup heating surface b Bean container, ground coffee chute and rotary control for selecting fineness of ground coffee c Display and controls k Cappuccinatore dial for selecting hot milk, hot water and milk froth l Air intake nozzle m Milk tube n Dispensing spout d Steam and hot water spout e Cappuccinatore for frothing milk (see inset diagram above) f Coffee spouts g Drip tray cover h Drip tray with waste container i Master switch j Water container 6 Symbols on the cappuccinatore d
Guide to the machine Display and controls Control How to operate Function a Coffee button / Press For dispensing coffee b Espresso button .
Warning and Safety instructions Correct application This coffee machine conforms with all current safety requirements. Improper use can, however, lead to personal injury and damage to property. ~ The coffee machine is not designed To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important notes on the installation, safety, operation and care of the machine.
Warning and Safety instructions Safety with children Caution. The coffee spouts and the cappuccinatore present a danger of burning or scalding. Children's skin is very sensitive and reacts to hot temperatures. ~ Place the coffee machine where it is out of the reach of children. ~ It is not a toy! To avoid the risk of injury do not allow children to play with it or its controls. Supervise children whilst you are using it.
Warning and Safety instructions ~ Disconnect the machine from the electricity supply immediately you notice any damage or the smell of scorching, for example. ~ Ensure that the mains connection cable cannot become trapped or damaged by any sharp edges. ~ The mains connection cable should not hang down. Someone could trip over it and the machine could be damaged. Excess cable can be pushed through the cable exit at the back of the machine.
Warning and Safety instructions Correct use Caution. The coffee spouts and the cappuccinatore present a danger of burning or scalding. The liquids and steam dispensed are very hot. ~ Please note: – Keep well away from the area underneath the coffee spouts or cappuccinatore when hot liquids and steam are being dispensed. – Do not touch hot components. – Ensure that the cappuccinatore is fitted correctly. Only fit the cappuccinatore if it is clean.
Warning and Safety instructions ~ Please note the following with regard to cleaning the coffee machine: For machines with a stainless steel trim: – Disconnect the coffee machine from the electricity supply before cleaning. ~ Do not use sticky notes, transparent – Clean the coffee machine every day (see "Cleaning and care" for more information). – Do not use a steam cleaner to clean this appliance. Steam could cause a short circuit.
Preparing the coffee machine for use Switching on for the first time Please read the operating instructions and take the time to familiarise yourself with the coffee machine before using it for the first time. When you switch the coffee machine on for the first time, after the welcome screen has appeared you will be prompted to set the following: – Language Before using for the first time – Clock format ^ Set up the coffee machine and remove any protective film (see "Installation").
Preparing the coffee machine for use To set the clock display ^ If you want the time to be shown as a 12 hour clock, turn the rotary control until 12 H appears. or ^ If you want the time to be shown as a 24 hour clock, turn the rotary control until 24 H appears. The following will appear in the display: SYSTEM FILLING UP START ^ Press the OK button. TIP Continue following the instructions given in this booklet to set up your machine and familiarise yourself with it. ^ Press the OK button.
Preparing the coffee machine for use There is a choice of four water hardness levels: – Level 1 (soft): Local water hardness range 0-8.4 °d (0-1.5 mmol/l) Water flow rate: approx. 220 l Steam flow rate: approx. 440 min – Level 2 (medium): Local water hardness level 1 8.4-14 °d (1.5-2.5 mmol/l) Water flow rate: approx. 100 l Steam flow rate: approx. 200 min – Level 3 (hard): Local water hardness range 2 14-21 °d (2.5-3.8 mmol/l) Water flow rate: approx. 70 l Steam flow rate: approx.
Filling the water container The quality of the water plays an important part in the overall quality of the coffee. The water container should therefore be emptied and filled with fresh tap water every day. Warning. Bacteria can cause infection. It is important to empty and fill the container with fresh tap water every day to avoid the risk of bacteria building up. Hot or warm water or other liquids can damage the coffee machine. Do not use mineral water in the water container.
Filling the coffee bean container If you want to use freshly ground coffee beans for each cup of espresso or coffee, fill the coffee bean container with roasted coffee beans. Alternatively, you can make coffee or espresso with ready ground coffee (see "Preparing coffee or espresso using ready ground coffee"). Warning. Only put roasted coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Warning.
Switching on and off You can use the On/Off button (standby) to switch the coffee machine on and off, if the master switch at the back of the machine is switched on. Switching on When the On/Off button - is pressed, the coffee machine will heat up and the pipework will be rinsed through. This cleans and heats the pipework ready for coffee preparation. After rinsing, hot water will run into the drip tray.
Pre-heating cups Cups should always be pre-heated to allow the flavour of the coffee to develop and be retained. The smaller the volume of coffee/espresso and the thicker the cup, the more important it is to pre-heat the cup. You can use the cup heating surface on the top of the coffee machine to pre-heat coffee cups and glasses. The cup heating function must be switched on. TIP To save energy you could also heat cups with hot water by using the - button.
Making coffee or espresso Making coffee or espresso When the / or . button is pressed, the coffee machine grinds the beans and then uses the freshly ground beans to brew the coffee. Making two portions of coffee or espresso at the same time You can select two portions of coffee or espresso at the same time. The coffee machine will then make the portions one after the other. To prepare two cups of coffee or espresso at the same time: ^ Place a cup under the coffee spouts.
Making coffee or espresso To make a double portion of coffee or espresso, Adjusting the coffee spouts to the correct cup height ^ place one cup under both coffee spouts. You can adjust the coffee spouts to suit the height of the cup you are using so that the coffee or espresso will not cool down as quickly and the crema will have a better consistency. ^ Press the / button twice, to make a double coffee. or ^ Press the . button twice, to make a double espresso.
Making coffee or espresso using ready ground coffee To make espresso or coffee using ready ground coffee, you add a portion of ground coffee to the ground coffee chute. This gives you the option of preparing a cup of decaffinated coffee, for example, even though the coffee bean container is filled with roasted coffee beans. The coffee machine will automatically recognise that ready ground coffee has been added to the ground coffee chute.
Making coffee or espresso using ready ground coffee Preparing coffee or espresso using ready ground coffee You can now select whether you want to dispense a coffee or an espresso made with ground coffee. If no button is pressed within approx. 15 seconds, the ground coffee is emptied into the waste container. Cancelling preparation Preparation can be cancelled while STOP? is showing in the display. The ground coffee will be directed into the waste container. ^ Then press the OK button.
Frothing and heating milk You can use the coffee machine to heat or froth milk. Preparing milk froth The coffee machine draws the milk through a tube from the container, e.g. a milk carton. Steam is then used to heat the milk in the cappuccinatore. It can also be frothed if milk froth is required. If you have not prepared any milk drinks for some time, rinse the milk system before preparing the first drink to remove any bacteria which may have formed in the milk tube and in the cappuccinatore.
Frothing and heating milk Preparing hot milk Cancelling preparation Milk preparation can be cancelled while STOP? is showing in the display. ^ Press the OK button. Milk preparation will be cancelled. After preparing milk ^ Turn the cappuccinatore dial to the J position. The cappuccinatore can become clogged with milk residues so it should be rinsed through if more than an hour has elapsed since a drink with milk has been prepared (see "Rinsing the cappuccinatore").
Frothing and heating milk Temperature of the milk and consistency of the milk froth You can use the cappuccinatore dial to adjust the temperature of the milk and the consistency of the milk froth. Coffee specialities You can use the coffee machine to prepare these easily and quickly. For a Cappuccino: ^ Half fill a cup with milk froth. ^ Then place the cup under the coffee spouts and dispense an espresso. For a Latte Macchiato: ^ First fill a glass with one third hot milk and then add one third milk froth.
Preparing hot water If you have previously used the cappuccinatore to prepare hot milk or milk froth: ^ Rinse the cappuccinatore with water (see "Cleaning and care"). Caution. Danger of burning and scalding on the cappuccinatore. The liquids and steam dispensed are very hot. ^ Turn the cappuccinatore dial to the position. ^ Place a cup or suitable container under the cappuccinatore. ^ Press the - button. ^ Press the OK button when there is enough hot water in the container.
Coffee the way you like it You can customise the coffee machine to suit your exact requirements. You can – adjust the grinder setting, – change the amount of coffee, – pre-brew the freshly ground coffee, To avoid damaging the grinder: only ever adjust the grinder by one setting at a time. Grind the coffee beans again if you want to adjust the grinder to the next setting. – set the brewing temperature. ^ Place a suitable container underneath the coffee spouts.
Coffee the way you like it Amount of coffee The coffee machine can grind and brew 6-14 g of coffee per cup. The greater the quantity, the stronger the coffee or espresso. You can alter the amount of coffee, by selecting a different setting. There is a choice of three settings: – mild – normal There are various ways to tell whether the amount of coffee is set correctly. – strong The amount of coffee is too low, if You can set different amounts of coffee for espresso and coffee.
Coffee the way you like it Pre-brewing the coffee Brewing temperature When the pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavour of the coffee. The ideal brewing temperature will depend on The pre-brewing function can be switched on or off. The machine is delivered with pre-brewing switched off.
Coffee the way you like it ^ In the main menu, press the OK button for two seconds. r SETTINGS TEMPERATURE s ^ Turn the rotary control until TEMPERATURE appears in the display. Press the OK button. ^ To set the brewing temperature for espresso, turn the rotary control until ESPRESSO appears in the display. or ^ To set the brewing temperature for coffee, turn the rotary control until COFFEE appears in the display. ^ Then press the OK button.
Setting the portion sizes You can programme the amount of water used for each portion of espresso, coffee or hot water to suit your taste and your cups. With milky drinks you can set the duration of the steam used for heating or frothing the milk. There is a maximum amount of water which can be programmed for each type of drink. Water flow stops automatically when the maximum amount possible is reached. The maximum amount possible for that type of drink will then be saved.
Setting the portion sizes Setting the duration of the steam used for hot milk and milk froth The duration of steam used is the same for heating milk and for frothing milk. ^ Place a container with sufficient milk beside the coffee machine on the right hand side. Insert the milk tube in the container. ^ Turn the cappuccinatore dial to the z or J position. ^ Place the cup you wish to programme the steam duration for under the cappuccinatore. ^ Press the * button until PROG. THE AMOUNT appears in the display.
The SETTINGS menu You can use the SETTINGS menu to customise the coffee machine to suit your personal requirements. Options which are currently selected will have a tick B next to them. If none of the buttons has been pressed for a while, the coffee machine will revert to the main menu. Operating principles What to you want to do? How to do it Call up the SETTINGS menu In the main menu or standby mode, press the OK button for 2 seconds.
The SETTINGS menu Possible setting options Option Available settings Language Deutsch, English and other languages Maintenance Rinse the system Descale Clean the brew unit Time of day (available in Comfort mode) Clock display 12 H / 24 H Set Timer (available in Comfort mode) Set switch on at / switch off after (1:00) / switch off at Activate switch on at (12:00) / switch off at (12:00) Programme the amount Espresso Coffee Steam Hot water Amount of coffee Espresso mild / normal / strong Coffee m
Language You can select the language you want the display to appear in in the SETTINGS menu. ^ Press the OK button for two seconds. r SETTINGS LANGUAGE F s ^ Turn the rotary control until LANGUAGE appears in the display. Press the OK button. ^ Turn the rotary control until the language you want appears in the display. Press the OK button. The setting will be saved and the display will revert to the previous screen. The display will now appear in the language you have set.
Time of day and Clock display If you are operating the coffee machine in Comfort mode you can set the Time of day and the Clock display in the SETTINGS menu. The clock can be displayed as: – a 12 hour clock To set the time of day You can now enter the hours and minutes: The time of day has to be set for the timer to work, however it will not be visible in the display. You will need to reset the time of day if there is a power cut or if you switch the coffee machine off with the master switch.
Timer function To set the timer The timer is only available if you are operating the coffee machine in Comfort mode. ^ Press the OK button for two seconds. r You can set the timer so that the coffee machine: – switches on at a particular time, e.g. in the morning for breakfast (SWITCH ON AT). – switches off at a particular time (SWITCH OFF AT) – switches off after a particular length of time if none of the buttons have been pressed or no drink has been prepared (SWITCH OFF AFTER).
Timer function ^ Turn the rotary control until the minutes you want appear in the display. Press the OK button. The setting is now saved. If you have activated the timer function (see "To activate and deactivate the Timer"), the coffee machine will now switch on at the required time. If the coffee machine has switched itself on automatically 3 times and no drinks have been dispensed, the machine will not switch itself on again automatically.
Timer function To activate and deactivate the timer If you have activated the "Switch on at" option for the timer, c will appear in the display when the coffee machine is in Standby mode. ^ Press the OK button for two seconds. r SETTINGS TIMER s ^ Turn the rotary control until TIMER appears in the display. Press the OK button. ^ Turn the rotary control until ACTIVATE appears in the display. Press the OK button.
Factory default You can reset the settings back to the ones which were set when the coffee machine was delivered - the factory default settings. Please refer to the "Possible setting options" chart for the factory settings which are shown in bold. Please note that the following settings will not be reset: - Language Time of day Number of drinks dispensed To reset the settings: ^ Press the OK button for two seconds.
Operating modes You can operate the coffee machine in Eco mode or Comfort mode. The Eco Mode is an energy-saving mode. The coffee machine will switch to energy saving mode if it has not been used to prepare a drink for some time. The coffee machine will heat up again when a button is pressed. The "Switch on at" and "Switch off at" timer functions are not available in Eco mode. In Comfort mode the coffee machine will remain heated and all functions are available without restriction.
To lock the coffee machine To deactivate the system lock temporarily You can lock the coffee machine to prevent it being used without your knowledge, by children, for example. To activate and deactivate the system lock When the system lock is activated, the "Switch on at" option for the timer will not work. The c timer symbol will not appear in the display. ^ Press the OK button for two seconds.
To display information You can use the INFO option to check – the total number of portions of espresso, coffee, steam and hot water dispensed (TOTAL PORTIONS), – the number of portions of espresso and coffee dispensed (COFFEE), – how many times steam for hot milk and milk froth has been generated (STEAM), – how many times hot water has been generated (HOT WATER) and – whether more than 50 portions can be dispensed before the machine needs to be descaled (NO. PORTIONS UNTIL DESCALING).
Cleaning and care Quick guide Clean the coffee machine every day to prevent a build-up of bacteria.
Cleaning and care Rinsing the system Danger of burning and scalding on hot components or by hot liquids! Always allow the coffee machine to cool down before cleaning. Caution. The water in the drip tray can be very hot. Do not use a steam cleaner to clean the coffee machine. The steam could cause a short circuit. Do not use cleaners containing chlorides, acids, soda or scouring agents. These would damage the surface.
Cleaning and care ^ Turn the rotary control until RINSE THE SYSTEM appears in the display. Press the OK button. ^ In the main menu, press the OK button for two seconds. r SETTINGS AUTOMATIC RINSING s ^ Turn the rotary control until AUTOMATIC RINSING appears in the display. Press the OK button. ^ Turn the rotary control until YES appears in the display, if you want to switch the automatic rinsing function on.
Cleaning and care Rinse the cappuccinatore ^ Place a container with some water beside the coffee machine on the right hand side. Insert the milk tube in the water. ^ Turn the cappuccinatore dial to the J or z position. Cleaning the cappuccinatore Caution! Danger of burning. The cappuccinatore is very hot after it has been used to prepare milk. Allow it to cool down before cleaning. ^ Place a suitable container underneath the cappuccinatore. ^ Press the * button.
Cleaning and care ^ Clean all parts with a solution of hot water and washing-up liquid. If neccessary, a small brush can be used to remove any stubborn milk deposits. ^ Rinse all parts carefully under running water. ^ Then dry them carefully. Drip tray cover ^ Remove the drip tray cover from the drip tray. ^ The drip tray cover can be cleaned in the dishwasher or by hand using hot water and a little washing-up liquid. ^ Dry the drip tray thoroughly.
Cleaning and care Drip tray and waste container Clean the drip tray and waste container every day to avoid unpleasant smells and mildew. The waste container is located in the drip tray. The coffee machine will alert you via the display when the drip tray and/or waste container is full and needs to be emptied. Remove the drip tray and waste container and empty and clean them when this message appears, if not before.
Cleaning and care Waste container The waste container will usually contain some residual water from the rinsing process. ^ Push the coffee spouts as far upwards as they will go. ^ Carefully remove the drip tray together with the waste container. ^ Empty the waste container and the drip tray, if necessary. Used coffee grounds should be disposed of with organic rubbish or on the compost heap. ^ The waste container can be cleaned in the dishwasher or by hand using hot water and a little washing-up liquid.
Cleaning and care Brew unit Clean the brew unit by hand only using hot water. Do not use washing-up liquid. When the brew unit has been pulled out, do not alter the position of the brew unit handle. This would displace the brew unit and it would not fit back into the coffee machine. Please note: – The moving parts of the brew unit are lubricated. Washing-up liquid will damage the brew unit. ^ Clean the brew unit by hand under hot running water without using washing-up liquid.
Cleaning and care To replace the brew unit proceed in the reverse order: ^ Push the brew unit back into the coffee machine, making sure it is straight. Cleaning the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. Degrease the brew unit using a cleaning tablet. Use the cleaning tablets supplied.
Cleaning and care Various instructions about degreasing the brew unit will appear in the display. You must empty the drip tray when prompted to do so in order that the cleaning programme can continue. TIP Place a suitable container underneath the coffee spouts, so that you do not have to empty the drip tray too frequently. When DROP CLEANING TAB IN GROUND COFFEE CHUTE appears: ^ Open the lid on the right hand side of the coffee machine. Casing Remove any soiling straight away.
Descaling Limescale builds up in the coffee machine during use. It will need to be descaled regularly. How often, will depend on the hardness of the local water supply. The coffee machine will remind you when the descaling programme needs to be carried out. NO. PORTIONS UNTIL DESCALING: 50 will appear in the display. The remaining number of drinks that can be made before descaling will now show in the display after each drink is made. ^ Confirm the message by pressing the OK button.
Descaling Follow the instructions on the packet carefully. It is important that you fill the water container with enough water. Too little water will cause the descaling programme to be cancelled prematurely. ^ Replace the water container in the coffee machine. Please follow the instructions which appear in the display. When FILL WATER CONTAINER AND PLACE IN MACHINE appears, ^ remove the water container and rinse it carefully with clean water.
Problem solving guide , Warning. Do not open the outer casing of the appliance. Maintenance and repairs should only be carried out by a service technician authorised by the manufacturer. Maintenance and repairs done by unqualified persons could be dangerous and the manufacturer will not be held liable. Most faults are easily rectified yourself without contacting the Service Department. In some cases, a message will appear in the display. Follow the instructions to remedy the problem.
Problem solving guide Messages in the display Message Possible cause and remedy FAULT - 1 The coffee machine has overheated. ^ Switch the machine off with the On/Off button. Wait for one hour and then switch it back on again. FAULT - 2 FAULT - 82 If the fault message appears in the display again, ^ Call the Service Department. FAULT - 28 There is too much ready ground coffee in the ground coffee chute.
Problem solving guide Message Possible cause and remedy The following appears in the display, even though the drip tray is empty: The drip tray is not sitting correctly. EMPTY THE The metal contact discs are dirty. ^ Clean the discs and then dry them thoroughly. DRIP TRAY ^ Push the drip tray into the coffee machine until it clicks into position. or or ^ The drip tray sensing mechanism is not working. ^ Switch the coffee machine off and then back on again using the master switch.
Problem solving guide Message Possible cause and remedy The following appears in the display, although the water container is full: The water container is not sitting correctly. ^ Remove the water container and replace it. If the fault message appears in the display again, ^ empty the water container. FILL WATER CONTAINER AND PLACE IN THE MACHINE ^ Shake the water container to check that the float is moving freely. ^ Fill the water container with fresh tap water and push it into the machine.
Problem solving guide Message Possible cause and remedy The message The coffee machine needs descaling and/or the brew unit filters are blocked. SYSTEM FILLING UP START appears in the display again. ^ Switch the machine off with the On/Off button -. ^ Press the OK button for 2 seconds and call up MAINTENANCE - DESCALE. ^ Descale the coffee machine. ^ Remove the brew unit and rinse under running water (see "Cleaning and care - Brew unit").
Problem solving guide Unsatisfactory results Problem Possible cause and remedy Only water is dispensed from the coffee spouts when coffee has been selected. The ground coffee chute lid has been opened and then closed again without any ready ground coffee being added to the chute. Then the YES option was selected when GROUND COFFEE appeared in the display. ^ If you have not added any ground coffee to the ground coffee chute you must select NO when prompted to use GROUND COFFEE.
Problem solving guide Problem Possible cause and remedy The coffee or espresso is not hot enough. The cup has not been pre-heated. ^ Pre-heat the cups (see "Pre-heating cups"). or The brewing temperature has been set too low. ^ Set a higher brewing temperature (see "Brewing temperature). or The filters in the brew unit are blocked. ^ Clean the brew unit (see "Cleaning the brew unit") ^ Degrease the brew unit (see "Cleaning the brew unit") The crema on the coffee or espresso is not as it should be.
Problem solving guide Unusual performance of the coffee machine Problem Possible cause and remedy The filters in the brew unit are blocked. Only very little coffee or nothing at ^ Clean the brew unit (see "Cleaning the brew unit") all is dispensed from ^ Degrease the brew unit (see "Cleaning the brew unit") the coffee spouts, although a drink has been selected. Water stopped flowing whilst programming the amount to use. The maximum amount possible was reached.
Problem solving guide Problem Possible cause and remedy The display remains dark when the coffee machine is switched on using the On/Off button -. The master switch is at "0". ^ Set the master switch to "I". or The plug is not inserted in the socket correctly. ^ Insert the plug in the socket correctly. or The main fuse has tripped due to a problem with the coffee machine, the electricity supply or another appliance. ^ Switch off at the wall socket and unplug it.
Problem solving guide Problem Possible cause and remedy The coffee grinder makes a louder noise than usual. There could be stones in amongst the coffee beans. ^ Switch the coffee machine off, immediately. ^ Call Miele Service. or The coffee bean container has become empty during the grinding process. ^ Fill the container with fresh beans. The brew unit cannot be removed. or The brew unit cannot be replaced in the coffee machine. The brew unit or the brew unit motor is not in the correct position.
Problem solving guide Problem Possible cause and remedy The descaling programme was started by mistake. The descaling programme cannot be cancelled once you have pressed the OK button. The programme has to be carried through to the end. This is a safety measure to ensure that the machine is fully descaled, and is important for the long-term protection of the machine and to ensure it functions correctly. ^ Descale the coffee machine (see "Descaling").
After Sales / Guarantee In the event of a fault which you cannot correct yourself, or if the machine is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your machine, both of which are shown on the data plate located behind the drip tray inside the machine. Please note that telephone calls may be monitored and recorded for training purposes (UK only). N.B.
Accessories The following accessories are supplied with the machine: – Measuring spoon for ground coffee – Cleaning tablets for degreasing the brew unit – Descaling tablets for descaling the water pipework – Test strips for determining the water hardness level Miele offers a range of useful accessories as well as cleaning and conditioning products for your coffee machine.
Saving energy Eco mode Using the coffee machine in Eco mode saves energy. The coffee machine will switch to energy saving mode if it has not been used to prepare a drink for some time. This means that the machine does not remain heated and so saves energy. The coffee machine will heat up again as soon as a drink is selected. Pre-heating the cups with hot water If you only want to pre-heat cups occassionally you can switch the cup heating surface off.
Transporting the coffee machine If you are not going to use the coffee machine for a long period of time and it needs to be moved, e.g. when moving house: – Empty and clean the coffee bean container – Empty and clean the water container Caution. Danger of burning and scalding from hot steam coming out of the cappuccinatore. The evaporation process is finished when this message goes out. – Evaporate the coffee machine ^ Switch the machine off with the master switch.
Electrical connection All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not supplied to the machine until after installation work has been carried out.
Installation Please note: Danger of overheating. Ensure that there is sufficient ventilation around the coffee machine. Make sure that the vents on the top of the machine are not covered completely. Danger of overheating. If the coffee machine is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the furniture door while the coffee machine is in use.
Coffee machine dimensions 74
Alteration rights reserved / 5011 CM 5100 M.-Nr.
