Coffeemaker User Manual

The descaling program was started accidently.
The descaling program cannot
be canceled once the OK button
has been pressed.
This is a safety measure to
ensure that the machine is fully
descaled. It is important for the
long-term protection of the
machine and to ensure that it
functions properly.
^
Complete the descaling program (see
"Descaling".)
Loud noised are heard during the descaling program.
This is not a fault.
These noises occur when water is flushed through the machine at a high
pressure.
The heating-up time is longer than ususal, the amount of water being
dispensed is not right and the coffee machine is not performing correctly.
The coffee system needs to be
descaled.
^ Descaling the coffee system (see,
"Descaling").
Water is being sprayed above or is running out of the top of the
cappuccinatore.
The cappuccinatore and steam
tube are not connected securely.
^ Remove the cappuccinatore by pulling it
downwards.
^
Turn the connecting piece very firmly onto
the steam pipe.
^
Push the cappuccinatore back onto the
steam and water spout from below.
Milk is dripping from the cappuccinatore even though you are through
dispensing milk.
The level of milk in the milk
container is higher than the
cappuccinatore.
^
Turn the cappuccinatore dial to the -
position.
Frequently Asked Questions
67