Coffeemaker User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Accessories 10
- First steps to use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Preparing coffee or espresso 18
- Making coffee or espresso using ground coffee 20
- Frothing and heating milk 22
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- SETTINGS Menu 33
- Language 35
- Time of day and clock display 36
- Default settings 40
- Operating modes 41
- System lock 42
- Displaying information 43
- Cleaning and care 44
- Descaling 55
- Energy saving mode 57
- Transport 58
- Frequently Asked Questions 59
- After sales service 68
- Installation instructions 69
- Caring for the environment 70
- Electrical connection 71
- Installation 72
- Dimensions 73
The coffee or espresso is not hot enough.
The cup has not been
pre-heated.
^
Pre-heat the cups (see "Pre-heating cups").
The brewing temperature is set
too low.
^
Set a higher brew temperature (see "Brewing
temperature").
The brew unit filters are
blocked.
^
Clean the brew unit.
^
Clean/degrease the brew unit.
See "Cleaning and care".
The crema on the coffee or espresso is "not right".
The grinder is not set correctly.
^
Set the grinder to a coarser or finer setting
(see "Adjusting the grinder setting").
The brew temperature is too
high for the type of coffee being
used.
^ Set a lower brewing temperature (see
"Brewing temperature").
The coffee beans are no longer
fresh.
^ Add new beans to the coffee bean container.
The coffee dispensers are too
high.
^ Pull the dispensers down until they are at the
same height as the cup rim.
Frequently Asked Questions
63