Coffeemaker User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Accessories 10
- First steps to use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Preparing coffee or espresso 18
- Making coffee or espresso using ground coffee 20
- Frothing and heating milk 22
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- SETTINGS Menu 33
- Language 35
- Time of day and clock display 36
- Default settings 40
- Operating modes 41
- System lock 42
- Displaying information 43
- Cleaning and care 44
- Descaling 55
- Energy saving mode 57
- Transport 58
- Frequently Asked Questions 59
- After sales service 68
- Installation instructions 69
- Caring for the environment 70
- Electrical connection 71
- Installation 72
- Dimensions 73
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Do not open the outer casing of the coffee system.
Fault messages appear in the display
Fault - 1, Fault - 80 or Fault - 82
The coffee machine has
overheated
^
Turn the machine off with the On/Off button.
Wait approx. one hour and then turn it on
again.
^
If the fault still appears, contact Miele
Technical Service.
Fault - 28
There is too much coffee in
the ground coffee chute.
If more than one level scoop is put into the
ground coffee chute the brew unit cannot
process it. The ground coffee will be directed
into the waste container, and a Fault will
appear in the display.
^ Turn the coffee system off with the - button.
Wait approx. two minutes and then turn it on
again.
Fault - 73
The brew unit cannot be
positioned correctly.
^
Turn the coffee system off with the - button.
^
Press the . and / buttons at the same time.
Then press the OK button twice.
This will initialize the brew unit motor and put
in back into the start position.
^
If the fault appears again, contact Miele
Technical Service.
Frequently Asked Questions
59