Coffeemaker User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the machine 8
- Accessories 10
- First steps to use 11
- Filling the water tank 14
- Filling the coffee bean container 15
- Turning the machine On / Off 16
- Pre-heating cups 17
- Preparing coffee or espresso 18
- Making coffee or espresso using ground coffee 20
- Frothing and heating milk 22
- Preparing hot water 26
- Adjusting the grinder setting 27
- Adjusting the strength of the coffee 28
- Pre-brewing the coffee 29
- Brewing temperature 30
- Setting the serving size 31
- SETTINGS Menu 33
- Language 35
- Time of day and clock display 36
- Default settings 40
- Operating modes 41
- System lock 42
- Displaying information 43
- Cleaning and care 44
- Descaling 55
- Energy saving mode 57
- Transport 58
- Frequently Asked Questions 59
- After sales service 68
- Installation instructions 69
- Caring for the environment 70
- Electrical connection 71
- Installation 72
- Dimensions 73
^
Replace the water container in the
coffee system.
When FILL WATER CONTAINER AND
PLACE IN MACHINE appears in this
display:
^
remove the water tank and rinse it
carefully with clean water. Be sure
that no descaling agent is left in the
water container. Fill the water
container with cold, clean tap water
up to the "Max." mark.
PROGRAM FINISHED will appear in the
display when the descaling process
has been completed.
^ Confirm with OK.
^ Wash the cappuccinatore to remove
any descaling agent.
^ Empty and wash the drip tray.
^ Wash the water container.
The descaling program is now
complete and drinks can be prepared.
When descaling the machine be
sure to wipe away any splashes of
descaling agent immediately. These
could cause damage.
Selecting Descale via the
MAINTENANCE menu
^
In the main menu press and hold the
OK button for two seconds.
SETTINGS
< MAINTENANCE >
^
Turn the rotary selector until
MAINTENANCE appears in the
display. Confirm with OK.
^
Turn the rotary selector until
DESCALE appears in the display.
Confirm with OK.
^ Turn the rotary selector until START
appears in the display.
The descaling program cannot be
canceled once it has been started.
^ Press the OK button.
Descaling
56