Datasheet

10
DA 2900 ceiling extractor
Planning notes
DA 2900 as vented model
In order to guarantee maximum installation
flexibility, the motor block has a swivel joint.
This allows air to be ducted off vertically or
to any of the four sides with a 150 mm vent
connection. This unit has an installation
height of 310 mm.
To further reduce the installation depth, the
motor block can be removed from the
extractor unit and installed in an alternative
location up to 1.85 m away from the unit.
When fitting the ceiling fan in close
proximity to a wall, a distance of 50 mm
must be observed.