Cooker hoods Double glazing, central heating and insulation all hinder the circulation of fresh air. In the kitchen cooking generates steam, grease and odours that have nowhere to go unless they are either extracted or recirculated. There are several considerations above and beyond the aesthetic. Whilst design is important, it requires the combination of form and function to create a kitchen that is both beautiful and comfortable.
Cooker hoods Low noise levels A special acoustic package works in conjunction with the latest in motor technology to ensure our cooker hoods are highly efficient and at the same time exceptionally quiet in operation. Easy operation With fully electronic controls and LED lights for 3 extraction levels and an intensive setting as well as a run-on function and filter change indicators, our cooker hoods are built to provide just the right level of extraction for your kitchen.
Wall mounted cooker hoods DA 396-5 DA 399-5 DA 5495 W 60 cm wide Stainless steel For independently mounting on the wall or building in between units Extraction or option of recirculation Min. distance from gas hob, open grill, deep fat fryer 650 mm/electric hob 450 mm 90 cm wide Stainless steel For independently mounting on the wall or building in between units Extraction or option of recirculation Min.
Wall mounted cooker hoods DA 249-4 DA 6290 W – Lumen DA 289-4 90 cm wide Stainless steel with glass canopy For independently mounting on the wall or building in between units Extraction or option of recirculation Min. distance from lower edge of glass to gas hob, open grill, deep-fat fryer 650 mm/electric hob 450 mm 90 cm wide Stainless steel with glass edge lighting For independently mounting on the wall or building in between units Extraction or option of recirculation Min.
Wall mounted cooker hoods DA 5330 W DA 5320 W 150 cm wide Stainless steel For independently mounting on the wall or building in between units Extraction or option of recirculation Min. distance from gas hob, open grill, deep fat fryer 650 mm/electric hob 550 mm 120 cm wide Stainless steel For independently mounting on the wall or building in between units Extraction model only Min.
Island cooker hoods DA 390-5 DA 5100 D 100 cm wide Stainless steel For mounting on the ceiling above a cooking island Extraction or option of recirculation Min. distance from gas hob, open grill, deep-fat fryer 650 mm/electric hob 550 mm 100 cm wide Stainless steel For mounting on the ceiling above a cooking island Extraction model only Min.
Island cooker hoods DA 5000 D 110 cm wide Stainless steel and silver metallic glass For mounting on the ceiling above a cooking island Extraction model only Min.
Island cooker hoods DA 420 V DA 424 V DA 424 V EXT stainless steel 90 cm wide Stainless steel For mounting on the ceiling above a cooking island Extraction or option of recirculation Variable height Min. distance from gas hob, open grill, deep fat fryer 650 mm/electric hob 550 mm 120 cm wide Stainless steel For mounting on the ceiling above a cooking island Extraction model only Variable height Min.
Integrated cooker hoods DA 2050 DA 2170 53 cm wide For building in above cooking island or in chimney type installations Extraction or option of recirculation Min. distance from gas hob, open grill, deep fat fryer 650 mm/electric hob 450 mm 70 cm wide For building in above cooking island or in chimney type installations Extraction or option of recirculation Min.
DA 3160 DA 3190 Flat, pull-out deflector plate model For building into a 60 cm wide wall unit Extraction or option of recirculation Min. distance from gas hob, open grill, deep fat fryer 650 mm/electric hob 450 mm Flat, pull-out deflector plate model For building into a 90 cm wide wall unit (this cooker hood can also be fitted in a 60 cm wide wall unit if preferred) Extraction or option of recirculation Min.
External motors AWG 102 DDG 102 ABLG 202 INSTALLATION INSTALLATION INSTALLATION For installation on an outside wall For installation on a tiled roof (any angle) N.B. Not suitable for flat roofs For installation in an internal ceiling space, e.g.
Placeholder for text and images in the entire document Ceiling extractors DA 2900 MMS Job 11-0360
DA 2900 ceiling extractor 2
Miele's ceiling extractor Perfection in design and function In modern kitchens, a cooking island often represents the transition from kitchen to dining room or living room. An island decor cooker hood can be an optical highlight, however, brake up the open-plan room design and view into the living room. An appliance which creates space in such a situation in the most discreet of ways is Miele's DA 2900 ceiling extractor. Perfect particularly in puristic kitchens.
DA 2900 ceiling extractor Product benefits Con@ctivity - Miele's automatic function Con@ctivity – Miele's unique automatic function Con@ctivity allows a cooker hood to communicate with a hob unit down below and thereby pre-emptively adapt to cooking situations. Automatic extraction is the secret to user convenience and an ideal kitchen micro-climate. Switching the light on and off is also automatic. Automatic fan run-on reduces lingering kitchen odours to a great extent.
Remote control as standard accessory – for greater convenience Alongside the Con@ctivity option, the hoods can also be remotely operated with innovative design. The remote control handset controls both lighting and power settings. It can also be used to alter the fan run-on setting.
DA 2900 ceiling extractor Product benefits Effective multi-zone edge extraction in glass and stainless steel On its DA 2900, Miele has deliberately gone for multi-zone edge extraction. Compared with conventional edge extraction with a single impact panel, the individual and smaller panels on the Miele product offer key benefits: cooking vapours are extracted both around the perimeter of the unit and in the centre.
Simple cleaning and safe removal of panels and filters Both the edge-extraction panels and the 10-ply stainless-steel grease filters can be removed easily for washing in a dishwasher. This is not possible in the case of single-piece panels on conventional appliances which must be cleaned by hand. At Miele, a special removal system improves safety considerably; thanks to rails in the product interior, panels can be simply unhooked and removed without the risk of them dropping onto the hob unit below.
DA 2900 ceiling extractor Product benefits and planning notes Miele high-power LED lighting LED spotlights are not only an optical highlight. For ecological reasons, too, Miele decided to be the first manufacturer to use high-power LED lighting especially developed for Miele cooker hoods. This makes considerable energy savings possible. A Miele high-power LED spotlight consumes only 2 W per hour.
Flexible installation Unlike a conventional extractor hood, a ceiling extractor is at a much greater distance from the hob unit. In most cases, this requires a suspended ceiling or an alternative method of concealing ducting and technical components. To achieve acceptable solutions in rooms with a standard ceiling height, the modular DA 2900 caters for a variety of installation options. We recommend covering the cut-out of less strong ceilings with, for example, a wooden batten.
DA 2900 ceiling extractor Planning notes DA 2900 as vented model In order to guarantee maximum installation flexibility, the motor block has a swivel joint. This allows air to be ducted off vertically or to any of the four sides with a 150 mm vent connection. This unit has an installation height of 310 mm. To further reduce the installation depth, the motor block can be removed from the extractor unit and installed in an alternative location up to 1.85 m away from the unit.
DA 2900 as recirculation model with recirculation box For DA 2900 recirculation models, Miele will use an external recirculation box which can be freely situated. DA 2900 with external fan If there is need to overcome a greater distance, the external version of the fan can be installed. This reduces the space required above the suspended ceiling to 117 mm. Even in rooms of a normal height, this solution presents the perfect solution. All external fans available from Miele can be used.
DA 2900 ceiling extractor Planning notes Ceiling extractor ventilation technology information Extraction properties depend on various criteria. A key criteria is the distance between cooker hood and hob. 12 The optimum distance between hob and ceiling extractor is 700 – 1300 mm. It should be noted that vapours mix with air as they rise. This can have a negative influence on vapours. The bigger the gap, the less grease reaches the ceiling extractor.
13
DA 2900 ceiling extractor Product overview DA 2900 ceiling extractor DA 2900 external ceiling extractor DRP 2900 glass edge-extraction panels Design Features For decorative panelling for filter surfaces with glass elements. Dishwasher-proof glass edge-extraction panel set for DA 2900 ceiling extractor, consisting of 4 panels.
15
Miele & Cie. KG Vertriebsgesellschaft Deutschland Carl-Miele-Straße 29, 33332 Gütersloh Postfach, 33325 Gütersloh Telefon +49 5241 89-0 Telefax +49 5241 89-2090 E-Mail: info@miele.de An active contribution towards protecting the environment: This brochure is printed on paper bleached without the use of chlorine. © Miele & Cie. KG, Gütersloh / Mat. no.
