Specs

F 1913 Vi / F 1903 Vi
Page 2 of 7
SPECIFICATIONS
F 1903 Vi — Item 37190301USA - Right Hinged
F 1913 Vi — Item 37191301USA - Left Hinged
Overall Unit Width 35
3
/4” (908 mm)
Overall Unit Height 84” (2134 mm)
Overall Unit Depth 24” (610 mm)
Niche
Minimum Cabinet Opening Width
36” (915 mm)
Minimum Cabinet Opening Height 84” (2134 mm)
Minimum Cabinet Opening Depth 25” (635 mm)*
Interior Volume
Freezer Volume
19.21 cu-ft (544 L)
Plumbing
Water Supply Requirements
Connect to a cold water supply only. Do not
connect to a low-mineral or a reverse
osmosis system. Must be connected to a
shut-off valve. The water shut-off valve must
be accessible after installation. The water
pressure must be between 25 psi (1.7 bar)
and may not exceed 80 psi (5.5 bar). If the
pressure is higher than 80 psi (5.5 bar), a
pressure reducing valve must be installed.
Water Connection Line
Standard 1/4” O.D flexible water line. The
maximum outer diameter of the water pipe
(without fittings): 3/8” (10 mm). Water line is
not included.
Electrical
Electrical Requirements - Volts/Amps
110V / 120V, 60Hz, 15 Amps
In the case of side-by-side installations,
a separate outlet must be used for each
appliance.
Power Cord - Plug and length NEMA 5-15 plug, 5 ft (1.52 m)
Custom Panel
Please refer to the manual for further
details.
Maximum Panel Weight 79 lbs (36 kg)
Maximum Panel Thickness 1
1
/2” (38 mm)
Minimum Panel Thickness
3
/4” (19 mm)
Shipping
Shipping Weight 511.6 lbs (232 kg)
Shipping Dimensions 39
1
/2” W x 89
13
/16” H x 29
1
/4” D
Support
Call Miele [phone]
Miele Website
8www.mieleusa.com
20/20 Link
82020technologies.com
F 1913 Vi / F 1903 Vi
Features:
• MasterCool controls
• ClearView lighting system
• Drop and Lock Shelves
• SmartFresh storage drawers
• FullView storage drawers
• Ice maker
• RemoteVision capable
• Acoustic door and temperature
alarm
• Optical door and temperature
alarm
• Energy Star
Fully Integrated 36” Freezer with Internal Ice Maker
F 1913 Vi / F 1903 Vi
Please note the following:
• This specication sheet is for a single built-in unit.
• When combining multiple MasterCool units side-by-side, please refer to the Merging Kit
specication sheet.
*If design calls for a partition less than 6
5
/16” (160 mm) the left unit’s cutout will require an
additional
1
/8” (3 mm) to the width to allow installation of the Heating Mat/Merge Kit.