Specs

KF 1813 Vi / KF 1803 Vi
Page 6 of 9
CUSTOM PANEL INSTALLATIONS
Panel "B" Height
Width: 29 3/4" in all cases
Thickness: Minumum 3/4" outside frame
Standard Upper Panel Height: 53 5/16"
Note: Finish back side of panels to insure appearance
Panel may extend above unit. This is not
considered in height calculation
Upper Maximum panel weight : 103.6 Pounds
Lower Panel Height: Use the following calculation:
Panel Height = HOM - 53 9/16 - TKH
HOM =Total height of machine. Can be adjusted to
match adjoining cabinets - typically 84"
HOM is adjustable between 83 1/2" - 85 3/8"
TKH =Toe-kick height (2" - 8 3/8")
Lower Maximum panel weight:22 Pounds
Upper Panel
TKH
HOM
Panel Height
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the
cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets
.
Panel
size is determined in the following manner:
Lower Panel
Upper Panel Note
s
If
the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly.
Find
the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16"
Adjoining cabinet
Machine
Extended Panel Example:
Ajoining cabinet height: 87"
Height of machine: 84"
Difference: 3"
Extended panel height:56 5/16"
104
HOM - 53 9/16” (1360.5 mm) - TKH
53 5/16” (1354 mm)
29 3/4” (756 mm) in all cases
Minimum 3/4” (19 mm) outside frame
87” (2210 mm)
84” (2133 mm)
3” (76 mm)
56 5/16” (1430 mm)
Total height of machine. Can be adjusted
to match adjoining cabinets - typically 84”
(2133 mm).
HOM is adjustable between 83 1/2” -
85 3/8” (2121 mm - 2165 mm)
Lower Maximum panel weight: 22 Pounds
Toe-kick height 2” - 8 3/8” (51 - 212 mm)
TKH =
Fully Integrated 30” Bottom Mount
KF 1813 Vi / KF 1803 Vi