Specs

SPECIFICATIONS
KF 1803 SF — Item 38180311USA - Right Hinged
KF 1813 SF — Item 38181311USA - Left Hinged
Overall Unit Width - Excluding Fascia Dimension 29
3
/4” (756 mm)
Overall Unit Height - Excluding Fascia Dimension 84” (2134 mm)
Overall Unit Depth - Excluding Fascia Dimension 24” (610 mm)
Overall Fascia Dimensions
30
1
/2” (775 mm) W x 84
1
/2” (2146 mm) H
x
3
/4” (19 mm) D
Niche
Minimum Cabinet Opening Width 30” (762 mm)
Minimum Cabinet Opening Height 84” (2134 mm)
Minimum Cabinet Opening Depth 24” (610 mm)
Interior Volume
Fresh Food Volume
10.8 cu-ft (305.8 L)
Freezer Volume 4.39 cu-ft (124.3 L)
Plumbing
Water Supply Requirements
Connect to a cold water supply only. Do not
connect to a low-mineral or a reverse
osmosis system. Must be connected to a
shut-off valve. The water shut-off valve must
be accessible after installation. The water
pressure must be between 25 psi (1.7 bar)
and may not exceed 80 psi (5.5 bar). If the
pressure is higher than 80 psi (5.5 bar), a
pressure reducing valve must be installed.
Water Connection Line
Standard 1/4” O.D flexible water line. The
maximum outer diameter of the water pipe
(without fittings): 3/8” (10 mm). Water line is
not included.
Electrical
Electrical Requirements - Volts/Amps
110V / 120V, 60Hz, 15 Amps
In the case of side-by-side installations,
a separate outlet must be used for each
appliance.
Power Cord - Plug and length NEMA 5-15 plug, 5 ft (1.52 m)
Shipping
Shipping Weight 522.5 lbs (237 kg)
Shipping Dimensions 33
1
/2” W x 89
13
/16” H x 29
1
/4” D
Support
Call Miele [phone]
Miele Website
8www.mieleusa.com
20/20 Link
82020technologies.com
KF 1813 SF / KF 1803 SF
Features:
• MasterCool controls
• ClearView lighting system
• Drop and Lock Shelves
• SmartFresh storage drawers
• FullView storage drawers
• Ice maker
• RemoteVision capable
• Acoustic door and temperature
alarm
• Optical door and temperature
alarm
• Energy Star
KF 1813 SF / KF 1803 SF
Page 2 of 5
Please note the following:
• This specication sheet is for a single built-in unit.
• When combining multiple MasterCool units side-by-side, please refer to the Merging Kit
specication sheet.
*If design calls for a partition less than 6
5
/16” (160 mm) the left unit’s cutout will require an
additional
1
/8” (3 mm) to the width to allow installation of the Heating Mat/Merge Kit.
Built-In 30” Bottom Mount
KF 1813 SF / KF 1803 SF