Specs

Panel "B" Height
Width: 29 3/4" in all cases
Thickness: Minumum 3/4" outside frame
Standard Upper Panel Height: 53 5/16"
Note: Finish back side of panels to insure appearance
Panel may extend above unit. This is not
considered in height calculation
Upper Maximum panel weight : 103.6 Pounds
Lower Panel Height: Use the following calculation:
Panel Height = HOM - 53 9/16 - TKH
HOM =Total height of machine. Can be adjusted to
match adjoining cabinets - typically 84"
HOM is adjustable between 83 1/2" - 85 3/8"
TKH =Toe-kick height (2" - 8 3/8")
Lower Maximum panel weight:22 Pounds
Upper Panel
TKH
HOM
Panel Height
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets.
Panel size is determined in the following manner:
Lower Panel
Upper Panel Notes
If the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly.
Find the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16"
Adjoining cabinet
Machine
Extended Panel Example:
Ajoining cabinet height: 87"
Height of machine: 84"
Difference: 3"
Extended panel height:56 5/16"
Fully Integrated
24” MasterCool | KWT 26x1 Vi(S)
Page 9 of 12
CUSTOM PANEL INSTALLATIONSCUSTOM PANEL INSTALLATIONS
137 Pounds
10 1/8” (257 mm) min.
5 7/8” (140 mm) min.
23 3/4” (604 mm)in all cases
Minimum 3/4” (19 mm) outside frame
2 1/2” - 3 1/4”
(63.5 - 82.5 mm)
Both Sides
17 1/4” - 18 5/8”
(439 - 473 mm)
63 7/8” (1623 mm) max.