User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Status display
- Adjusting the interior fittings
- Using the door-shelf fine adjustment
- Repositioning the door shelf with fine adjustment
- Moving the door shelf/bottle shelf
- Clipping the egg trays on
- Adjusting or removing the bottle holder
- Moving the shelf/shelf with lighting
- Moving the adjustable shelf with pivotable glass shelf (FlexiTray)
- Using the bottle rack in the dividing plate
- Removing and reinserting the organization box
- Inserting the adapters for the baking tray
- Moving the carbon filter
- When you are storing very strong-smelling food (e.g., cheese):
- Optional accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Selecting additional settings
- Explanation of the different settings
- Party mode
- Vacation mode
- Switching the safety lock function / on
- Deactivating the safety lock function / temporarily
- Switching the safety lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and audible signals /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Carbon-filter change indicator
- Cleaning mode
- Explanation of the different settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Active zone
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the interior of the appliance
- Cleaning accessories by hand or in the dishwasher
- Removing, dismantling, and cleaning accessories
- Removing the door shelf with fine adjustment
- Dismantling the door shelf/bottle shelf
- Dismantling the adjustable shelf/adjustable shelf with lighting
- Dismantling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Assembling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Removing the drawers from the refrigerator section
- Replacing the drawers
- Removing and dismantling the water container for the humidifier
- Removing the dividing plate and bottle rack
- Removing the compartment lid
- Removing the drawers and glass shelves from the freezer section
- Removing the drawer on telescopic runners
- Replacing the drawer
- Removing the bottom drawer
- Removing a glass shelf
- Removing the telescopic runners from the glass shelf
- Replacing the carbon filters (optional accessories)
- Cleaning the ice-cube tray
- Cleaning the door seal
- Cleaning the ventilation gaps
- After cleaning
- Frequently Asked Questions
- Causes of noises
- Customer Service
Frequently Asked Questions
89
Problem Possible cause and solution
Close the appliance doors.
After a while, the temperature will return to normal by
itself.
If a thick layer of ice has already formed, this will af-
fect cooling and increase energy consumption.
Defrost the appliance and clean it.
The ambient temperature is too high. The higher the
ambient temperature, the longer the compressor
runs.
See the information in the section on “Installation –
Installation location”.
The appliance was not properly installed in the niche.
Install the refrigeration appliance in the niche as
described in the installation instructions supplied
with it.
The temperature setting in the refrigeration appliance
is too low.
Correct the temperature setting.
A large amount of food was put in for freezing all at
once.
See the information in the section on “Freezing
and storing food”.
The Automatic SuperCool function is still turned
on.
Switch off the Automatic SuperCool function
earlier to save energy.
The SuperFreeze function is still switched on.
Switch off the SuperFreeze function earlier to
save energy.