User Manual

Cleaning and care
86
 Touch the symbol on the display
to confirm that the filters have been
replaced.
The “Replace carbon filter” reminder
will go out on the display and the
counter will be reset.
The symbol will go out on the status
display.
Cleaning the ice-cube tray
The ice-cube tray cannot be removed
and therefore has to be moved into
the cleaning position.
Clean the ice-cube tray:
- Before switching off the ice-cube
maker for a long period of time.
- Regularly, to remove ice and water
residues.
Selecting the cleaning position for
the ice-cube tray
Before selecting the cleaning position
for the ice-cube tray, check the follow-
ing:
- The ice-cube maker is switched on.
- The ice-cube drawer is empty and in
position.
 Tap.
 Swipe left or right until is shown in
the middle.
 Tap.
It will take some time to move the ice-
cube tray into the cleaning position.
If the ice-cube drawer is full, will ap-
pear on the display. The process will
stop and and the ice-cube tray will re-
turn to its original position.
 Empty the ice-cube drawer and start
the process again.
Once the ice-cube tray has stopped
moving, the symbol will appear on
the display.
 To leave this Settings level, tap.
 Remove the ice-cube drawer.
 Clean the ice-cube tray and the ice-
cube drawer with lukewarm water
and liquid dish soap. Wipe thoroughly
with clean water and dry with a cloth.
 Insert the ice-cube drawer back into
the appliance.
 After cleaning, tap.
You will hear the ice-cube tray return to
its original position.