User Manual

Table Of Contents
Cleaning and care
78
- shelves and bottle shelves in the ap-
pliance door (without stainless steel
trim)
- door shelf with fine adjustment
- the adjustable shelves (without the
strips or printing)
- the glass shelves (without trim)
- the partition for the ice-cube drawer
- the 2pieces that make up the water
container for the humidifier
- the adapters for the baking tray
- the holder for the carbon filter (avail-
able as an optional accessory)
Removing, dismantling, and
cleaning accessories
Removing the door shelf with fine ad-
justment
Hold the door shelf in both hands,
press the gray buttons on both sides
under it, and slide it up off the guide
rails.
Remove the guide rail from the lugs.
Once you have cleaned it, move the
guide rail to the desired position and
place the second guide rail parallel to
the first rail on the opposite side.
Push the shelf back down onto the
guide rails.
Dismantling the door shelf/bottle
shelf
Remove the stainless steel trim before
cleaning the door shelf/bottle rack in a
dishwasher.
To remove the stainless steel trim, pro-
ceed as follows:
Place the door shelf/bottle rack on
the countertop.
Press the retainer out of the recess.
The entire section of stainless steel
trim will now come off the shelf.
After cleaning, reattach the stainless
steel trim to the shelf by following the
same procedure in reverse.