User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Status display
- Adjusting the interior fittings
- Using the door-shelf fine adjustment
- Repositioning the door shelf with fine adjustment
- Moving the door shelf/bottle shelf
- Clipping the egg trays on
- Adjusting or removing the bottle holder
- Moving the shelf/shelf with lighting
- Moving the adjustable shelf with pivotable glass shelf (FlexiTray)
- Using the bottle rack in the dividing plate
- Removing and reinserting the organization box
- Inserting the adapters for the baking tray
- Moving the carbon filter
- When you are storing very strong-smelling food (e.g., cheese):
- Optional accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Selecting additional settings
- Explanation of the different settings
- Party mode
- Vacation mode
- Switching the safety lock function / on
- Deactivating the safety lock function / temporarily
- Switching the safety lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and audible signals /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Carbon-filter change indicator
- Cleaning mode
- Explanation of the different settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Active zone
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the interior of the appliance
- Cleaning accessories by hand or in the dishwasher
- Removing, dismantling, and cleaning accessories
- Removing the door shelf with fine adjustment
- Dismantling the door shelf/bottle shelf
- Dismantling the adjustable shelf/adjustable shelf with lighting
- Dismantling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Assembling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Removing the drawers from the refrigerator section
- Replacing the drawers
- Removing and dismantling the water container for the humidifier
- Removing the dividing plate and bottle rack
- Removing the compartment lid
- Removing the drawers and glass shelves from the freezer section
- Removing the drawer on telescopic runners
- Replacing the drawer
- Removing the bottom drawer
- Removing a glass shelf
- Removing the telescopic runners from the glass shelf
- Replacing the carbon filters (optional accessories)
- Cleaning the ice-cube tray
- Cleaning the door seal
- Cleaning the ventilation gaps
- After cleaning
- Frequently Asked Questions
- Causes of noises
- Customer Service
Selecting additional settings
55
Resetting the network configuration
Tap.
Swipe left or right until is shown in
the middle.
Tap.
Swipe right until is shown in the
middle.
Tap.
TapOK.
All entered settings and values for
Miele@home are reset to the default
settings.
The WiFi connection has been deacti-
vated. will go out on the status dis-
play.
Reset the network configuration if
you are disposing of or selling your
refrigeration appliance, or if you are
putting a used refrigeration appliance
into operation. All personal data is
removed from the refrigeration appli-
ance. This will also ensure that a pre-
vious owner is no longer able to ac-
cess the refrigeration appliance.
Changing the volume of the alarms
and audible signals/
You can change the volume of the
alarms and audible signals (e.g., in the
event of a door alarm or a fault mes-
sage). Alternatively, you can switch the
alarms and audible signals off if you
find them annoying.
Tap.
Swipe left or right until is shown in
the middle.
Tap.
Swipe left or right until the volume
you want is shown in the middle.
Confirm the volume you want by tap-
ping on the segment bar.
When the alarms and audible signals
are switched off, will appear.
Adjusting the display brightness
You can adjust the display brightness to
the lighting conditions in the room.
Tap.
Swipe left or right until is shown in
the middle.
Tap.
Swipe left or right until the brightness
you want is shown in the middle.
Confirm the brightness you want by
tapping on the segment bar.