User Manual

Table Of Contents
Installation
*INSTALLATION*
27
A shut-off valve must be provided be-
tween the hose and the plumbed-water
connection to ensure that the water
supply can be cut off if necessary.
Make sure that the shut-off valve is
still accessible after the appliance
has been installed.
Water supply
Ensure that the connections are tight
and leak-proof.
Risk of damage to the hose.
The water supply from the shut-off
valve to the ice-cube maker has
been interrupted.
Do not bend or damage the hose.
A shut-off valve with a metric
R3/4thread must be incorporated
when connecting to the water supply.
The solenoid valve is located at the
back of the refrigeration appliance on
the bottom right. It also has a metric
R3/4thread.
–Connecting the hose to the refriger-
ation appliance
Pull the cover off the thread of the so-
lenoid valve.
Position the angled end of the
hose horizontally on the holder
and hold onto it securely.
Screw the nut onto the thread by
hand until it is securely in place.