User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Status display
- Adjusting the interior fittings
- Using the door-shelf fine adjustment
- Repositioning the door shelf with fine adjustment
- Moving the door shelf/bottle shelf
- Clipping the egg trays on
- Adjusting or removing the bottle holder
- Moving the shelf/shelf with lighting
- Moving the adjustable shelf with pivotable glass shelf (FlexiTray)
- Using the bottle rack in the dividing plate
- Removing and reinserting the organization box
- Inserting the adapters for the baking tray
- Moving the carbon filter
- When you are storing very strong-smelling food (e.g., cheese):
- Optional accessories
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Selecting additional settings
- Explanation of the different settings
- Party mode
- Vacation mode
- Switching the safety lock function / on
- Deactivating the safety lock function / temporarily
- Switching the safety lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and audible signals /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Carbon-filter change indicator
- Cleaning mode
- Explanation of the different settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh Active zone
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the interior of the appliance
- Cleaning accessories by hand or in the dishwasher
- Removing, dismantling, and cleaning accessories
- Removing the door shelf with fine adjustment
- Dismantling the door shelf/bottle shelf
- Dismantling the adjustable shelf/adjustable shelf with lighting
- Dismantling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Assembling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Removing the drawers from the refrigerator section
- Replacing the drawers
- Removing and dismantling the water container for the humidifier
- Removing the dividing plate and bottle rack
- Removing the compartment lid
- Removing the drawers and glass shelves from the freezer section
- Removing the drawer on telescopic runners
- Replacing the drawer
- Removing the bottom drawer
- Removing a glass shelf
- Removing the telescopic runners from the glass shelf
- Replacing the carbon filters (optional accessories)
- Cleaning the ice-cube tray
- Cleaning the door seal
- Cleaning the ventilation gaps
- After cleaning
- Frequently Asked Questions
- Causes of noises
- Customer Service
Installation
*INSTALLATION*
20
This must be taken into consideration
when planning your kitchen and when
replacing an old refrigeration appliance
with a new one to ensure the installation
conditions required are met.
Door
panel
thick-
ness
A [in
(mm)]
Gap X[in (mm)]
for different edge radiiB
R0 R1.2 R2 R3
≥5/8"-
3/4"
(16–19)
min. 1/8" (3)
13/16"
(20)
3/16"
(5)
3/16"
(4)
3/16"
(4)
1/8"
(3.5)
13/16"
(21)
3/16"
(5.5)
3/16"
(5)
3/16"
(4.5)
3/16"
(4)
7/8" (22) 1/4"
(6.5)
1/4"
(6)
3/16"
(5.5)
3/16"
(5)
PP
PP
Adjoining housing-unit door
A=Door-panel thickness
B=Edge radius
X=Gap
PP
PP
Adjoining side wall
A=Door-panel thickness
B=Edge radius
X=Gap
Tip: Fit a spacer between the housing-
unit body and the side wall. This way
you will get a sufficiently wide gap.
Tip: Please also see the diagram and
information on the following pages on
calculating the cabinet door height.