Technical data

Activating Con@ctivity 2.0
41
Installation of the Con@ctivity
2.0 stick
In order for you to be able to use the
Con@ctivity 2.0 function, the cooktop
must be equipped with a Con@ctivity
2.0 stick.
 See the relevant installation
instructions of the Con@ctivity 2.0
stick.
Activating Con@ctivity 2.0
To use the Con@ctivity 2.0 function, the
radio link between the cooktop and the
hood must be activated.
Both appliances must be installed and
operatio
nal.
You only need to carry out the
activation pr
ocedure once. If the
appliances are disconnected from the
electricity supply, for example during a
loss of power, they will still remain
activated.
To establish radio connection, the
ventilation hood and cooktop must be
activated at the same time.
Start activation on the ventilation hood
first, and then begin activation on the
cooktop.
Activating the ventilation hood
 Turn off the fan, cooktop lighting and
cookt
op.
 Press the Delayed shut down button
5
15 for approx. 10 seconds until
the 1 indicator appears in the fan
level display.
 Then, press the following buttons in
or
der:
– The "" butt
on
– Followed by the "" button
– And then the lighting button .
If Con@ctivity 2.0 has not been
activated, the indicat
ors for levels 2 and
3 will flash at the same time.
 To activate Con@ctivity 2.0, press the
"" button.
The hood begins searching for a radio
connection. Indicat
or 2 is continuously
lit, and the indicator 3 flashes.
 As this is happening, begin activation
on the
cooktop.
Activating the cooktop
 While the ventilation hood is
searching
for a signal, start activation
on the cooktop.
More information can be found in the
operating instructions for the
cooktop.
Once the radio connection has been
established, the indicators 2 and 3 on
the hood are continuously lit.
 Confirm activation of the ventilation
 Confirm activation on the cooktop.