User manual

Settings
106
Memory
The washing machine will save the
last settings (temperature, spin speed
and some of the Extras) selected for a
programme after the programme has
started.
When the programme is chosen again,
the saved settings will appear in the
display.
Memory is deactivated as standard.
Clock display
After selecting the Clock format you
can set the time of day.
Clock format
- 24 h clock (default setting)
- 12 h clock
Set
- The time of day can be set.
Volume
Finish tone
The volume can be changed for the
buzzer that sounds at the end of the
programme.
It can be set to one of 7 different set-
tings or switched off altogether.
Keypad tone
The volume of the tone that sounds
when a sensor is touched can also be
changed.
It can be set to one of 7 different set-
tings or switched off altogether.
Display brightness
The brightness of the display can be
altered.
It can be set to one of 7 different set-
tings.
Units
The temperature can be displayed as
degrees Celsius (°C) or Fahrenheit (°F).
The factory setting is °C/Celsius.
“Display” off status
The display and the sensor control
lighting is switched off to save energy.
The Start/Stop sensor flashes slowly.
Options
- Off
The lighting remains switched on.
- On (factory setting)
The lighting switches off after
10minutes.
- On. Not in current prog.
The lighting remains switched on
throughout the programme. The light-
ing switches off 10minutes after the
programme has ended.