User manual

Settings
93
Remote control
The Remote control setting is only vis-
ible if the Miele@home setting is set up
and activated.
Once the Miele app has been installed
on your mobile device, you can check
the status of your washing machine
from anywhere and start it remotely.
You can also control it remotely via the
MobileStart programme.
You can switch off the Remote control
setting if you do not want to operate the
washing machine with your mobile
device.
If Remote control is not switched on, the
app can cause the programme to be
cancelled.
Use the delay start function to set a
timeframe within which you want to
start the washing machine (see “Delay
start/SmartStart”).
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.
Remote control is activated as stand-
ard.
SmartGrid
The SmartGrid setting is only visible if
the Miele@home setting is set up and
activated.
You can set your washing machine to
start automatically based on an ex-
ternal signal within a certain time
period.
Activating SmartGrid gives the Delay
start sensor control a new function. Use
the delay start control to set the
SmartGrid. The washing machine will
then start within the time period spe-
cified by you when it receives an ex-
ternal signal. If an external signal has
not been received by the latest start
time set, the washing machine will start
automatically (see the “Delay start”
chapter).
SmartGrid is deactivated as standard.