User manual

Programmable functions
90
Postponing the update
After the washing machine is switched
on,  appears on the time display.
 Touch the sensor control.
The running time of the selected pro-
gramme appears on the time display.
The next time you switch on the wash-
ing machine, you will be prompted to
start the update again.
Switching off WiFi
 Turn the programme selector to the
MobileStart programme.
 appears on the time display.
 Press  and hold sensor control
until the countdown on the time dis-
play has finished.
 appears on the time display.
- The WiFi is switched off.
- The WiFi connection will be reset to
the factory default setting.
The network configuration should be
reset whenever a washing machine is
being disposed of or sold, or if a
used washing machine is being put
into operation. This is the only way to
ensure that all personal data has
been removed and the previous
owner will no longer be able to ac-
cess the washing machine.
A new connection has to be set up in
order to use the Miele@home setting
again.
Copyrights and licences for the
communication module
For the purpose of operating and con-
trolling the communication module,
Miele uses proprietary or third-party
software that is not covered by open
source licensing terms. These items of
software/software components are pro-
tected by copyright. The copyrights
held by Miele and third parties must be
respected.
Furthermore, this communication mod-
ule contains software components
which are distributed under open
source licence conditions. The open
source components contained in the
appliance along with the corresponding
copyright notices, copies of the licens-
ing terms valid at the time, and any fur-
ther information can be accessed loc-
ally via IP using a web browser (http://
<IP address>/Licenses). The liability
and warranty arrangements for the
open source licences displayed in this
location only apply in relation to the re-
spective rights holders.