User manual

Programmable functions
86
 Backlight brightness
dimmed
The brightness of the dimmed sensors
in the control panel can be set to one
of seven different levels.
The brightness changes as soon as you
select a different setting.
Options
 = Darkest level

 = Lightest level
 = (Factory default setting)
 TwinDos
You can switch TwinDos on or off. The
Twin Dos whites or TwinDos colours
sensor controls light up dimly when a
wash programme is selected or the
sensor controls are switched off.
Options
 = TwinDos is switched off
 = TwinDos is switched on (fact-
ory default)
 UltraPhase1 dispensing
quantity
The dispensing quantity is preset to
58ml at the factory (water hardness
level II).
You can adjust the dispensing quantity
using this programmable function.
The set millilitres appear on the time
display. You can use the sensor con-
trol to increase the dispensing quantity
and the sensor control to reduce it.
 UltraPhase2 dispensing
quantity
The dispensing quantity is preset to
45ml at the factory (water hardness
level II).
You can adjust the dispensing quantity
using this programmable function.
The set millilitres appear on the time
display. You can use the sensor con-
trol to increase the dispensing quantity
and the sensor control to reduce it.