User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Operating the washing machine
- Caring for the environment
- Before using for the first time
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Load the washing machine
- 3. Select a programme
- 4. Add detergent
- 5. Start the programme
- 6. End of programme
- Spinning
- Delay start
- Programme chart
- Extra options
- Programme sequence
- Changing the programme sequence
- Garment care label symbols
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Water hardness levels
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Using fabric conditioner or starch separately
- Colour run and dye removers/dyes
- Recommended Miele detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Cleaning and care
- Problem solving guide
- The programme does not start
- The programme is cancelled and a fault indicator light lights up in the control panel
- During the programme, a symbol appears in the time display
- At the end of the programme, an indicator light lights up in the control panel
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation
- Technical data
- Consumption data
- Programmable functions
- Opening the programming level
- Choosing and selecting a programmable function
- Editing and saving a programmable function
- Exit programming level
- Buzzer duration
- Buzzer
- Sensor tone
- Lock code
- Control panel switch-off status
- Memory
- Longer pre-wash Cottons
- Gentle action
- Reduce temperature
- Water plus
- Water plus level
- Maximum rinse level
- Suds cooling
- Anti-crease
- Low water pressure
- Backlight brightness dimmed
- Operating hours
- Factory default
- Detergents and care products
Extra options
34
You can use the extra options buttons
to augment the wash programmes.
Selecting extra options
Extra options are selected and deselec-
ted using the relevant sensor buttons
on the control field.
Touch the sensor control for the extra
option you want.
The relevant sensor will light up brightly.
Not all extra options can be selected
with every wash programme.
If the sensor control lighting is switched
off, this means the extra option cannot
be selected. The extra option cannot be
activated by touch.
Short
For textiles with light soiling with no vis-
ible staining.
The wash duration is reduced.
Water +
The water level in the main wash and
the rinses will be increased. A second
rinse cycle is carried out in the Separate
rinse/Starchprogramme.
You can select other functions for the
Water +sensor control. These are de-
scribed under “Programmable func-
tions”.
Pre-wash
For laundry with large amounts of dirt,
e.g. dust and sand.
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will achieve a
better result. Small loads achieve a bet-
ter result.
The garments must be suitable for dry-
ing in a tumble dryer and suitable
for ironing .