User manual

Operating the washing machine
15
g
sensor control
You can view information about the
energy and water consumption of
your washing machine with the 
sensor.
See “Washing environmentally and
economically, Feedback” for more
information.
The following information will appear
in the display:
– An estimate of the energy and wa-
ter consumption before the pro-
gramme begins.
– The actual energy and water con-
sumption and the cost during the
programme or at the end of the
programme.
h
sensor
You can specify the level of soiling of
the load in three settings. This
sensor is only active with the
TwinDos option activated.
i
Start/Add laundrysensor control
 The programme can be started
as soon as the sensor control
is flashing on and off. Touching
theStart/Add laundry sensor
control starts the selected pro-
gramme. The sensor control
lights up constantly.
 Once the programme has been
started, theStart/Add laundry
sensor control allows you to
add laundry.
j
sensor
This sensor is used for activating
Cap dispensing.
k
TwinDos sensor control with the
additional Whites and Colours
sensor controls
The TwinDos sensor control is used
for deactivating and activating auto-
matic detergent dispensing. De-
pending on the colour mix of your
load, you can control the detergent
combination by selecting the Whites
or Colours sensor control.
Further information can be found in
“TwinDos”.
l
Optical interface
This is used by the Service depart-
ment as a transmission point.
m
Programme selector
for selecting programmes and for
switching off the appliance. The
washing machine is switched on
when you select a programme, and
switched off by turning the pro-
gramme selector to the  position.