User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Operating the washing machine
- Caring for the environment
- Before using for the first time
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Load the washing machine
- 3. Select a programme
- 4. Add detergent
- 5. Start the programme
- 6. End of programme
- Spinning
- Delay start
- Programme chart
- Extra options
- Garment care label symbols
- Programme sequence
- Changing the programme sequence
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Water hardness levels
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Using fabric conditioner or starch separately
- Colour run and dye removers/dyes
- Recommended Miele detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Cleaning and care
- Problem solving guide
- The programme does not start
- The programme is cancelled and a fault indicator light lights up in the control panel
- During the programme, a symbol appears in the time display
- At the end of the programme, an indicator light lights up in the control panel
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation
- Consumption data
- Technical data
- Programmable functions
- Opening the programming level
- Choosing and selecting a programmable function
- Editing and saving a programmable function
- Exit programming level
- Keypad tone
- Lock code
- _
- Memory
- Longer pre-wash Cottons
- Soak duration
- Gentle action
- Reduce temperature
- Water plus
- Water plus level
- Maximum rinse level
- Suds cooling
- Anti-crease
- Low water pressure
- Detergents and care products
Programmable functions
74
Memory
The washing machine will save the
last settings (temperature, spin speed
and some of the extras) selected for a
programme after the programme has
started.
When this programme is chosen again,
these saved settings will appear in the
display.
Options
= Memory is switched off (fact-
ory default setting)
= Memory is switched on
Longer pre-wash Cottons
If you require a longer pre-wash you
can extend the pre-wash time.
Options
= No increase in the pre-wash
time (factory default setting)
= + 6minutes increase in the
pre-wash time
= + 9minutes increase in the
pre-wash time
= + 12minutes increase in the
pre-wash time
Soak duration
You can set a duration for the soak
process of between 30minutes and
twohours.
You can select the duration in 30minute
increments. When the Soak Extra option
is selected the laundry will be soaked
for the duration selected.
Options
= 30minutes soak duration
(factory default setting)
= 1 hour soak duration
= 1 hour 30minutes soak dura-
tion
4 = 2 hours soak duration
Gentle action
Activating gentle action reduces the
drum action and is suitable for wash-
ing lightly soiled items more gently.
Gentle action can be activated for the
Cottons and Minimum iron pro-
grammes.
Options
= Gentle action is switched off
(factory default setting)
= Gentle action rhythm is
switched on