User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Operating the washing machine
- Caring for the environment
- Before using for the first time
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Load the washing machine
- 3. Select a programme
- 4. Add detergent
- 5. Start the programme
- 6. End of programme
- Spinning
- Delay start
- Programme chart
- Extra options
- Garment care label symbols
- Programme sequence
- Changing the programme sequence
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Water hardness levels
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Using fabric conditioner or starch separately
- Colour run and dye removers/dyes
- Recommended Miele detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Cleaning and care
- Problem solving guide
- The programme does not start
- The programme is cancelled and a fault indicator light lights up in the control panel
- During the programme, a symbol appears in the time display
- At the end of the programme, an indicator light lights up in the control panel
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation
- Consumption data
- Technical data
- Programmable functions
- Opening the programming level
- Choosing and selecting a programmable function
- Editing and saving a programmable function
- Exit programming level
- Keypad tone
- Lock code
- _
- Memory
- Longer pre-wash Cottons
- Soak duration
- Gentle action
- Reduce temperature
- Water plus
- Water plus level
- Maximum rinse level
- Suds cooling
- Anti-crease
- Low water pressure
- Detergents and care products
Extra options
33
You can use the extra options buttons
to augment the wash programmes.
Use the sensor control to select or
deselect extra options.
Touch the sensor control:
- Once: the Short extra option is selec-
ted and lights up.
- 2times: the Water + extra option is
selected and lights up.
- 3times: the Soak extra option is se-
lected and lights up.
- 4times: the Short and Water + extra
options are selected and light up.
- 5times: the Water + and Soak extra
options are selected and light up.
- 6times: all the extra options are
switched off.
Short
For textiles with light soiling with no vis-
ible staining.
The wash duration is reduced.
Water +
The water level in the main wash and
the rinses will be increased. A second
rinse cycle is carried out in the Separate
rinse/Starchprogramme.
You can select other functions for the
Water +sensor control. These are de-
scribed under “Programmable func-
tions”.
Soak
For cleaning heavily soiled and stained
items with protein stains.
- A duration of between 30minutes
and 2hours can be programmed in
30minute increments for the soak
process.
- The factory default setting is
30minutes.
See “Programmable functions – Soak”
for instructions on how to programme a
different soak period.
Pre-wash
For laundry with large amounts of dirt,
e.g. dust and sand.