User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Operating the washing machine
- GuideLine
- Caring for the environment
- Before using for the first time
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Load the washing machine
- 3. Select a programme
- 4. Add detergent
- 5. Start the programme
- 6. End of programme - unload the drum
- Spinning
- Delay start
- Programme chart
- Extra options
- Garment care label symbols
- Programme sequence
- Changing the programme sequence
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Water hardness levels
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Adding fabric conditioner or liquid starch separately
- Colour run and dye removers/dyes
- Recommended Miele detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Cleaning and care
- Problem solving guide
- The programme does not start
- The programme is cancelled and a fault indicator light lights up in the control panel
- During the programme, a symbol appears in the time display
- At the end of the programme, an indicator light lights up in the control panel
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- After sales service
- Installation
- Technical data
- Consumption data
- Programmable functions
- Choosing and selecting a programmable function
- Editing and saving a programmable function
- Exit programming level
- Buzzer duration
- Buzzer
- Sensor tone
- Lock code
- Switch-off tone volume
- Control panel switch-off status
- Memory
- Longer pre-wash Cottons
- Soak duration
- Gentle action
- Reduce temperature
- Water plus
- Water plus level
- Maximum rinse level
- Suds cooling
- Anti-crease
- Low water pressure
- Backlight brightness dimmed
- Welcome tone
- Operating hours
- Factory default
- Optional accessories
GuideLine
14
This washing machine is designed for
blind and visually impaired people and
is equipped with a special user inter-
face. In addition, an acoustic signal
sounds each time the sensor controls
are operated.
The control panel is made up of 2 parts.
The programme selector is located on
the right and the control field is located
in the centre.
Programme selector
The 12 wash programmes surround the
round programme selector. The setting
for switching off the washing machine is
located at the 12 o’clock position.
When the programme selector is turned
to a wash programme, the washing ma-
chine switches on automatically and
this is indicated by a corresponding
melody. The individual programmes are
indicated with a dot.
Clockwise, the following programmes
are included on the programme se-
lector:
- Express 20
- Dark garments/Denim
- Outerwear
- Proofing
- Drain/Spin
- Separate rinse/Starch
- Shirts
- Woollens
- Delicates
- Minimum iron
- Cottons
- ECO 40-60
Control field
The control field consists of sensor con-
trols. The sensor controls react to
touch. A confirmation signal sounds
when a sensor is touched. The control
field is explained from right to left be-
low.
Start/Stopsensor control
TheStart/Stopsensor control is marked
with a large circle surrounded by
dots. To start a wash programme,
touch the middle of this circle. A brief
signal sounds to confirm the pro-
gramme has been started and the door
can be heard locking into place.
Delay start sensor controls
These 3 sensor controls are located
above the Start/Stopsensor control.
The middle sensor control, marked
with dash – diamond – dash, switches
Delay start on or off. A brief signal
sounds to confirm Delay start has been
switched on. A signal will sound twice
in quick succession to indicate that
Delay start has been switched off.
The sensor control on the right ,
marked with a dot, increases the delay
start period by 1hour with every touch.
Each hour is indicated with a higher
pitch signal. A period of up to 7hours
can be selected. The sensor control on
the left , marked with a dot, reduces
the delay start period by 1hour with
every touch.